OPTO 22 G4OAC5 Datasheet & Stock

The G4OAC5 is a G4 digital AC Output Module used to control or switch AC loads. Module provides up to 4000V of optical isolation (transient) between field outputs and the control side of the circuit and each features zero voltage turn-on and zero current turn-off. AC output modules are equivalent to single-pole single-throw normally open contacts (Form A, SPST-NO). Each module is equipped with a 4 amp fast-blow fuse. The fuse breaking capacity is 40 amps at 250 VAC. Current should be limited to prevent the short circuit current from exceeding the rated breaking capacity of the fuse. Typical applications for AC output modules include switching loads such as AC relays, solenoids, motor starters, heaters, lamps and indicators.




Built-in LED status indicator

Removable fuse

3A at 45°C Current rating

Ability to withstand one-cycle surge of 80 amps

-30 to 70°C Operating temperature range





Applications


Lighting,

Motor Drive & Control,

HVAC,

Automation & Process Control,

Consumer Electronics