OPTO 22 ODC5R Datasheet & Stock

The ODC5R is a Reed Relay Digital Output Module for use with Opto22 SNAP PAC systems. The ODC5R is a Form A mechanical relay I/O module. This module was designed for a low-voltage DC load that that is purely resistive (no inrush current). Typical applications for these modules include analog signal and communication line multiplexing. Because of their low 10VA rating, these modules are not recommended for inductive or capacitive loads (even very small loads) because the inrush current is likely to exceed the 10VA rating.




Form A SPST Normally open contact type

0 to 100VDC/0 to 130VAC Line voltage

200mΩ Contact on-resistance

500µs Turn-on time

500µs Turn-off time

250µs Contact bounce

5 x 106 cycles Mechanical life





Applications


Automation & Process Control