Neutrik NC4FRX Datasheet & Stock

The NC4FRX from Neutrik is a 4 pole right angle extra slim female XLR cable connector. This cable connector has boot with polyurethane gland gives high protection to cable bending stresses. The female contact incorporates a solder barrier to prevent solder running into the contact mating area and unique cage design for low contact resistance, high integrity. This female connector with improved solid metal latch which is larger and easier to handle. This is a sleek, valuable and handy connector with ergonomic design.




Additional ground spring contacts for better shell ground continuity

Improved chuck type strain relief provides higher pull-out force and makes assembly easier & faster

Polyamide (PA 6.6 30 % GR) insert, brass (CuZn39Pb3) contacts with silver plating

Zinc die-cast (ZnAl4Cu1) shell with nickel plating

Coloured rings and boots available for coding or identification

UL ECBT2.E135070 and cUL ECBT8.E135070 certified

Dielectric strength of 1.5KVDC, 10A rated current per contact and rated voltage

Lifetime > 1000 mating cycles, maximum wire size of 16AWG (1.5 mm²)

Flammability rating meets UL 94 HB and IEC 61076-2-103 standard compliance, IP 40 protection class

Temperature range from -30°C to +80°C





Applications


Audio,

Consumer Electronics