FTDI UM245R Datasheet & Stock

The UM245R module is a USB - Parallel FIFO interface (TTL) development module for the FT245R IC device. The compact module is designed to fit a 24 pin DIP socket which provides access to all FIFO interface and control pins (TXE#, RXF#, RD#, WR) on the FT245R device. The UM245R can be configured as either USB bus-powered or self-powered and also supports 5V or 3V level interface. Voltage levels set via onboard jumpers. The UM245R supports data transfers at up to 1 MegaByte per second. The UM245R plugs into a standard 24 pin 0.6in wide DIP socket.




Single chip USB to UART synchronous serial data transfer interface

Entire USB protocol handled on the chip – No USB-specific firmware programming required

Simple interface to MCU / PLD / FPGA logic with 4-wire handshake interface

Data transfer rate to 1 Megabyte / second - D2XX Direct Drivers

Data transfer rate to 300 kilobyte / second – VCP Drivers.

FTDI's royalty-free VCP,D2XX drivers eliminates requirement for USB driver developments.

FIFO with receive and transmit buffers for high data throughput

Integrated 1024bit internal EEPROM for storing USBVID, PID, serial num, product description strings

Device supplied pre-programmed with unique USB serial number

Support for bus powered, self powered and high-power bus powered USB configurations





Applications


Communications & Networking,

Wireless,

Portable Devices,

Medical,

Security,

Audio,

Imaging, Video & Vision,

Industrial,

Consumer Electronics,

Sensing & Instrumentation





Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.