AEMC Instruments AX503 Datasheet & Stock

AEMC AX503 Offers

The AX503 offers dual 30V outputs with the ability to display both voltage and current for each output. Additionally, the Model AX503 offers a 5V blind output which is adjustable from 2.7 to 5.5V. Dual 30V outputs can be connected in series to provide double the output voltage up to 60V, or they can be connected in parallel providing double the current output up to 5A.

The Model AX503 offers a unique master/slave tracking arrangement whereby the ratio between master and slave can be setup on the fly as needed during the test. Adjusting the master voltage causes the slave to track. Adjusting the slave voltage causes the ratio from master to slave to change accordingly. It offers a Coarse and Fine voltage adjustment as well as current limiting adjustment. The Model AX503 is built to provide many years of reliable, precise, easy-to-use operation and will be a welcome addition to any lab, test bench or production line.

Features

Single, dual and triple 0 to 30V DC / 0 to 2.5A outputs
Series and Parallel operation permit 0 to 60V or 0 to 5A output
Low noise (<1mV Ripple) and stable linear technology for clean output
High efficiency toroidal transformers: no fan and low electromagnetic emissions
Active protection against overloads, short circuits and overheating
Unique variable tracking mode for Master/Salve operation: Slave or Master track proportionally to the original setting
Simultaneous display of Voltage and Current
Highly visible Green (V) and Red (A) LED displays
Compact design for bench tops
Designed to EN 61010-1 safety standards


Applications

Engineering design labs
Production testing
Educational labs
Quality assurance testing
Approval agency testing
Repair and calibration labs