Amphenol TVPS00RF2519SLC Tri-Start Circular Connector

Amphenol TVPS00RF2519SLC Tri-Start Circular Connector Specifications:

• Shock: 300grms
• Sealing: Against sand, dust per MIL-STD-202 & ice resistance
• Contacts: Copper alloy
• Insulator: Hard dielectric wafer which contains tines for high-reliability retention of crimp contacts
• Salt Spray: Finish W, S, K, T, & Z: 500 hours per MIL-STD-1334A method 1001 condition C
• Mating Life: 500 cycles minimum
• Contact Type: Crimp, fibre optic, coax, twinax, or printed circuit
• Salt Spray 2: Finish F: 48 hours per MIL-STD-1334A method 1001 condition C
• Salt Spray 3: Finish J & K: 2000 hours per MIL-STD-1334A method 1001 condition C
• Salt Spray 4: Finish W52: 48 hours
• Salt Spray 5: Finish RB: 500 hours
• Salt Spray 6: Finish DT, DZ & ZN: 500 hours
• Sine Vibration: 60g at -55°C per MIL-DTL-38999K 4.5.22.2.1
• Contact Plating: Gold-plated, 50 microinches per MIL-G-45204 type II, grade C, class I
• Grommet & Seals: Silicone-based elastomer
• Shell & Plating: {'F': 'Electroless nickel QQ-N-290', 'M': 'Conductive electroless nickel plating', 'S': 'Electrodeposited nickel per QQ-N-290', 'Z': 'Black zinc nickel', 'DT': 'DurmalonTM', 'ZN': 'Black Zinc nickel (Europe only)', 'W52': 'Olive drab zinc cobalt', 'COMPOSITE': 'J - Olive drab cadmium plate per QQ-P-416', 'ALUMINUM ALLOY': 'W - Olive drab chromate over cadmium over electroless nickel per QQ-P-416', 'MARINE MATERIAL': 'RB - Nickel aluminum bronze', 'STAINLESS STEEL': 'K - Conductive, corrosion-resistant steel passivated'}
• Random Vibration: 49.5grms at ambient temperatures
• Contact Insertion: Rear-insertion/rear-extraction with simple plastic or high-quality metal hand tools
• Grounding Springs: Beryllium copper (grounded plug only)
• Number of Circuits: 2 to 128
• Wire Sealing Range: See table in datasheet
• Chemical Resistance: Lubricating oils, hydraulic fluids, coolants, deicing fluids per MIL-STD-1344A Method 1016 condition A-1
• Insulation Resistance: 5,000 megohms minimum
• Operating Temperature: W, W52, RB, J & ZN plating -65°C to 175°C (-85°F to 347°F)
• Temperature Durability: Finish W: 175°C (347°F), Finish F: 200°C (392°F), mated, wired test period 1000 hours to MIL-STD-1344 Method 1005
• Operating Temperature 2: DT, F, M, K & S plating -65°C to 200°C (-85°F to 392°F)
• Temperature Durability 2: Finish DT, M, K & S: 200°C (392°F)
• Temperature Durability 3: Finish J, RB, W52, DZ & ZN: 175°C(347°F)
• EMI-Shielding Effectiveness: 100 MHz to 10 GHz - minimum attenuation of 50dB
• Operating Voltage & Test Voltage: See table in datasheet
• Contact Resistance of Mated Contacts End to End: See table in datasheet
• Current Rating by Contact Size & Wire Accommodation: See table in datasheet