BELDEN 2412 008A1000 Datasheet & Stock

The 2412 008A1000 is a 4-pair CAT-6 unshielded Non-bonded-pair Cable with solid bare copper conductor, polyolefin insulator and a grey PVC jacket. The DataTwist® 2400 UTP cable provide for increased bandwidth and signal-to-noise margins. The DataTwist® 2400 cable exceed all TIA/EIA category-6 standard specifications and deliver guaranteed performance up to 300MHz. This cable provides the performance, throughput and reliability to keep your response-time critical applications operating at their peak. The 2400 series offers extremely stable transmission characteristics and a signal-to-noise ratio that is ideal for networks where noise and interference is high. The patented design features a central tape to provide pair-separation and matched conductors on all four pairs, which provide for extremely stable electrical performance. It features a small diameter for higher density installations, especially valuable for runs inside conduit.




Optimized balance of transmission performance for simultaneous parallel transmission protocols

Size minimized for compactness of installations

Descending distance marking for cable length reduces waste

Matching tip and ring colour code for ease of installation

40lbs Maximum recommended pulling tension

17pF/m Nominal mutual capacitance

70% Nominal velocity of propagation

7.8Ω/100m at 20°C Maximum conductor DC resistance (DCR)





Applications


Communications & Networking