CARLO GAVAZZI DPB71CM48 3-Phase Voltage Monitoring Relay

CARLO GAVAZZI DPB71CM48 3-Phase Voltage Monitoring Relay Specifications:

• Monitoring: TRMS 3-phase over and under voltage, phase sequence and phase loss
• Voltage Detection: Detects phase-phase and phase-neutral voltages within set limits
• Adjustability: Upper and lower voltage limits are separately adjustable
• Power Supply Monitoring: Monitors its own power supply
• Measuring Range Selection: Selected via DIP switches
• Voltage Adjustment: Adjustable voltage on a relative scale
• Delay Function: Adjustable delay function (0.1 to 30 s)
• Output: 5 A SPDT relay N.E.
• Mounting: DIN-rail mounting (DIN/EN 50 022)
• Housing: 35.5 mm DIN-rail housing
• LED Indication: LEDs for relay, alarm, and power supply status
• Supply Voltage: 208-480 VAC (multivoltage relays)
• Input Terminals: L1, L2, L3, N
• Measuring Ranges: ['208 to 240 ∆ VAC', '177 to 275 ∆ VAC', '380 to 480 ∆ VAC', '323 to 550 ∆ VAC']
• Voltage Ranges: ['Upper level: +2 to +22% of nominal voltage', 'Lower level: -22 to -2% of nominal voltage']
• Hysteresis: ['2 to 5% (set points)', '1% (set points)', '5 to 22% (set points)', '2% (set points)']
• Rated Insulation Voltage: 250 VAC
• Contact Ratings: {'Resistive Loads': '5 A @ 250 VAC', 'AC 1µ': '5 A @ 250 VAC', 'DC 12': '5 A @ 24 VDC', 'Small Inductive Loads': '2.5 A @ 250 VAC', 'AC 15': '2.5 A @ 250 VAC', 'DC 13': '2.5 A @ 24 VDC'}
• Mechanical Life: ≥30 x 10^6 operations
• Electrical Life: ≥10^5 operations (at 5 A, 250 V, cosϕ= 1)
• Operating Frequency: ≤7200 operations/h
• Dielectric Strength: 2 kVAC (rms)
• Impulse Withstand Voltage: 4 kV (1.2/50 µs)
• Power Supply Category: Overvoltage cat. III (IEC 60664, IEC 60038)
• Rated Operational Voltage: 208 to 240 VAC ± 15% (45 to 65 Hz)
• DPB71CM48 Power Supply: 380 to 480 VAC ± 15% (45 to 65 Hz)
• DPB71CM48 Star Voltage: 220 to 277 VAC ± 15% (45 to 65 Hz)
• DPB71CM23 Power Consumption: 13 VA @ 230∆VAC, 50 Hz
• DPB71CM48 Power Consumption: 13 VA @ 400∆VAC, 50 Hz
• Power ON Delay: 1 s ± 0.5 s or 6 s ± 0.5 s
• Reaction Time: < 200 ms (input signal variation ±20%)
• Alarm ON Delay: < 200 ms
• Alarm OFF Delay: < 200 ms
• Accuracy: ['± 1000 ppm/°C (Temperature drift)', '± 10% on set value', '± 50 ms', '± 0.5% on full-scale (Repeatability)']
• Degree of Protection: IP 20
• Pollution Degree: 3
• Operating Temperature: -20 to 60°C
• Storage Temperature: -30 to 80°C
• Housing Material: PA66 or Noryl
• Weight: Approx. 100g
• Terminal Torque: Max. 0.5 Nm
• Product Standard: EN 60947-5-1
• Approvals: ['UL', 'CSA', 'CCC (GB14048.5)']
• CE Marking: ['L.V. Directive 2006/95/EC', 'EMC Directive 2004/108/EC']
• EMC Immunity: According to EN 61000-6-2
• EMC Emissions: According to EN 61000-6-3