A Premier B2B Part Search
CARLO GAVAZZI PE12CNT15PO Photoelectric Through-Beam Sensor
The CARLO GAVAZZI PE12CNT series are general-purpose photoelectric sensors specifically engineered for demanding applications like elevators, escalators, and entrance control systems. These sensors feature a “snap-on” housing design adaptable to wall thicknesses from 0.6 mm to 2.25 mm. A key feature is the emitter mute input, allowing for evaluation of the sensor's function. Available in a 10-30 VDC version, the PE12CNT provides reliable detection with built-in protection against reverse polarity, short circuits, and transients. The sensors are CE, UL325, and UL508 approved, ensuring compliance with industry standards.
CARLO GAVAZZI PE12CNT15PO Photoelectric Through-Beam Sensor Specifications:
- Rated operational voltage (UB): 10 to 30 VDC
- Ripple (Urrp): ≤ 10%
- Supply current: ≤ 20 mA
- Protection: Reverse polarity, transients
- Power ON delay (tv): ≤ 100 ms
- Control input: > 1.5 VDC
- Mute input: < 1.2 VDC
- Light source: LED, 890 nm
- Light type: Infrared, modulated
- Light spot: 940 mm @ 9 m
- Emitter angle: ± 3° @ 9 m
- Rated operating distance (Sn): 15 m
- Blind zone: None
- Temperature drift: ≤ 0.4 %/°C
- Hysteresis (H): 3 - 20%
- No load supply current (Io): ≤ 16 mA
- Output current (Continuous): ≤ 100 mA
- Output current (Short-time): ≤ 100 mA
- Minimum operational current (Im): 0.5 mA
- OFF-state current (Ir): ≤100µA
- Voltage drop (Ud): ≤ 1.6 VDC @ 100 mA
- Utility category: DC12 / DC13
- Ambient light: 3,000 ... 3,200 K, > 80,000 LUX
- Detection angle: ± 2.5° @ 9 m
- Operating frequency (f): 100 Hz
- Response time (tON): ≈ 6.5 ms
- Response time (tOFF): ≈ 3.5 ms
- Output function: NPN or PNP, Make or break (NO or NC)
- Environment: Overvoltage category III, Pollution degree 3
- Degree of protection: IP67
- Operating temperature: -20° to +50°C
- Storage temperature: -25° to +80°C
- Rated insulation voltage: 75 VDC
- Dielectric test voltage: 500 Vac rms
- Rated impulse withstand test: 800 V
- ESPE: Type 2
- Performance level: C
- MTTFd: 298 Years
- Electrostatic discharge: > 12 kV (Contact), > 8 kV (Air)
- Radiated RF electromagnetic fields: > 10 V/m
- Electrical fast transients/burst: ≥ 1 kV (with 500 Ω)
- Wire conducted disturbances: > 10 Vrms
- Power-frequency magnetic fields: > 30 A/m, 38 μ tesla
- Vibration: 10 to 150 Hz, 1 mm / 15g
- Shock: 30 g / 11 ms
- Free fall: 2 times from 1 m, 100 times from 0.5 m
- Pig-tail connector: 3-pol micro MATE-N-LOK Series, AMP/TE
- Housing material (Body): PC black
- Housing material (Front): PC black
- Connection: Cable, PVC, Emitter: grey / Receiver: black, 5 m, 3 x 0.14 mm2, Ø 2.9 mm
- Weight (Emitter): 80 g
- Weight (Receiver): 80 g
- CE-marking: EN12445, EN12453, EN12978, EN 60947-5-2
- UL-Approval: UL325, UL508, CSA-C22.2 No.247
Buy the PE12CNT15PO CARLO GAVAZZI Photoelectric Through-Beam Sensor | myMectronic
Purchase the CARLO GAVAZZI PE12CNT15PO Photoelectric Through-Beam Sensor securely online today.
Buy Now
Frequently Asked Questions
Where can I buy CARLO GAVAZZI PE12CNT15PO?
You can click on the BUY or RFQ button to purchase PE12CNT15PO from an authorized CARLO GAVAZZI distributor.
How do I troubleshoot issues or seek technical support for part PE12CNT15PO?
You can download the PE12CNT15PO datasheet or visit the CARLO GAVAZZI website for support.
Who is the manufacturer of PE12CNT15PO?
CARLO GAVAZZI