CARLO GAVAZZI RJ1P48MBT50ECS Solid State Relay Modbus

CARLO GAVAZZI RJ1P48MBT50ECS Solid State Relay Modbus Specifications:

• AC semiconductor contactor: None
• MODBUS RTU interface over RS485: None
• RJ45 sockets: for easy installation
• Dual sockets: for daisy chaining
• Multi-function: 4 selectable modes of operation: ON/OFF, Phase angle, Distributed full cycle, Burst firing
• Operational ratings: up to 50 AACrms and 600 VAC
• Temperature monitoring: with over-temperature protection
• Opto isolation: > 4000 VACrms
• LED status indication: None
• Switching mode: P: Proportional
• Rated operational voltage: 23: 230VACrms, 48: 480VACrms, 60: 600VACrms
• Control input: MBT: 2-wire Modbus RTU
• Rated operational current: RJ1P23MBT50EBC, RJ1P23MBT50ECS, RJ1P23MBT50ECV, RJ1P48MBT50EBC, RJ1P48MBT50ECS, RJ1P48MBT50ECV, RJ1P60MBT50EBC, RJ1P60MBT50ECS, RJ1P60MBT50ECV
• Terminal layout: E: Contactor
• Configuration options: BC: Basic Controller, CS: Current Sensing, CV: Current & Voltage Sensing
• Blocking voltage: 650Vp, 1200Vp
• Supply voltage: 24VDC
• Control input type: RS485 interface (2-wire)
• Operating temperature: -30 to +70ºC
• Storage temperature: -40 to +100ºC
• Isolation: {'Input to output': '≥4000 VACrms', 'Output to case': '≥4000 VACrms'}
• Operational voltage range: {'RJ1P23': '90-265VAC', 'RJ1P48': '200-500VAC', 'RJ1P60': '410-660VAC'}
• Blocking Voltage: {'RJ1P23': '650Vp', 'RJ1P48': '1200Vp', 'RJ1P60': '1200Vp'}
• Power Factor: {'RJ1P23': '>0.9 @ 230VACrms', 'RJ1P48': '>0.9 @ 480VACrms', 'RJ1P60': '>0.9 @ 600VACrms'}
• Operational frequency range: 45-65 Hz
• Output indication: Green LED (dual intensity)
• Alarm indication: Red LED
• Weight: Approx. 415 g
• Housing material: PBT
• Control terminal cable size: Min: 1 x 0.5 mm2 (1 x AWG20), Max: 1 x 4.0 mm2 (1 x AWG12) or 2 x 2.5 mm2 (2 x AWG14)
• Mounting torque max.: 1 Nm Posidriv 0 bit
• Control terminal screw: M3
• Power terminal cable size: Min: 1 x 4 mm2 (1 x AWG12), Max: 1 x 25 mm2 (1 x AWG3) or 2 x 10 mm2 (2 x AWG6)
• Power terminal mounting torque max.: 2.4 Nm Posidriv 2 bit
• Power terminal screw: M5
• Data Connection: Shielded RJ45
• Data indication: Orange LED, flashing
• SSR fault detection: Yes
• Over temperature protection: Yes
• Output power: 0 – 99.6%
• Output power resolution: {'Mode 0 ON/ OFF': '1/1', 'Mode 1 Phase angle': '1/256', 'Mode 2 Full cycle': '1/256', 'Mode 3 Burst firing': '1/32 – 1/256 depending on time-base setting'}
• Pollution degree: 2
• Installation category: III
• Approvals: UL, cUL
• CE-marking: Yes
• Rated operational current AC51 @Ta=25ºC: 50AACrms
• Min. operational current: 500mAACrms
• Rep. overload current t=1 s (Tj init.=25°C): < 200AACrms
• Non-rep. surge current t=10 ms (Tj init.=25°C): 1900Ap
• Off-state leakage current, @ rated voltage and frequency: < 3 mArms
• I2t for fusing t=10 ms: 18000A2s
• Max. On-state voltage drop @ rated current: 1.6Vrms
• Critical dV/dt off-state: 1000V/µs
• Interface: RS485
• Bus Loading: 1/8 unit load
• Communication protocol: Modbus RTU
• Data line ESD voltage withstand: 15KV HBM
• Parity: Selectable - None, Odd, Even
• Data Rate: 9600, 19200, 38400, 57600, 115200 baud
• Devices on Bus: 247
• Address configuration: DIP-SWITCH
• Supply voltage range: 19.2 - 30 VDC
• Supply current @ 19.2 VDC: 13mA
• Supply current @ 30 VDC: 10mA
• Supply status indication: Green LED, half intensity