EMBEST MBCSAM9G25 Datasheet & Stock

The MBC-SAM9G25 is an ARM embedded core board featuring the ARM926EJ-S-based processor AT91SAM9G25. It operates at 400MHz and includes connectivity peripherals, high data bandwidth architecture, and a multi-layer bus matrix connected to multiple DMA channels, ensuring efficient data transfer with minimal processor load. Key interface peripherals comprise a camera interface compatible with ITU-R BT. 601/656 8-bit mode sensors and up to 12-bit grayscale sensors. Communication peripherals include a dedicated Conexant SmartDAA line driver-supported soft modem, USB host and device ports with on-chip transceivers supporting high-speed (480 Mbps), full-speed USB, 10/100 Ethernet MAC, two SDCard/SDIO/MMC interfaces, USARTs, SPI, I2S, multiple TWI interfaces, and a 10-bit ADC. The module features 16KB data and instruction caches, a memory management unit, 64KB internal ROM with bootstrap routines, 32KB internal SRAM with single-cycle access, and supports external memory including 128MB DDR2 SDRAM, 256MB NAND flash, 4MB data flash, 64KB serial EEPROM, and 128B one-wire EEPROM. It supports operating systems such as Windows CE and Linux, and features a 32-bit external bus interface supporting DDR2/LPDDR and static memories. Additional features include an advanced interrupt controller, debug unit, a shutdown controller with backup registers, very slow clock mode, and software-programmable power management options.

View MBCSAM9G25Datasheet [pdf]