FLUKE FLUKE-113 CAL Datasheet & Stock

The FLUKE-113 CAL is a utility multimeter with 3 3/4digits, 6000 counts, updates 4/sec display. This digital multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. It is simple to use and has features needed to repair most electrical problems. Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The min/max function lets users record signal fluctuations. It can perform diode tests for testing general purpose germanium, silicon and power diodes, continuity test and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight and a much larger display that’s easier to view. It complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 61010-1 (2004), FCC part 15, class B TUV, (N10140), VDE and IEC/EN 61010-1 2nd edition CAT IV 600V, CAT IV 300V, pollution degree 2, EMC EN61326-1.




Calibrated utility multimeter

6.000V to 600.0V VCHEK range, 600.0 ohm to 60.00Kohm resistance measurement range

1000nF to 9999μF capacitance measurement range

600V maximum voltage between any terminal and earth ground

True-rms for accurate ac measurements on non-linear loads

Large backlit display allows for easy visibility in low-lit areas

Record signal fluctuations using the min/max function

Integral holster with probe holders for easy storage

9V alkaline, ANSI 1604A/IEC 6F22 battery with 300hours life

167.1mm X 85.1mm X 46.0mm size (H x W x L), 404g weight, -10°C to 50°C operating temperature





Applications


Test & Measurement






Contents

Fluke 113 utility multimeter, TL75 test leads, 9V battery, Printed users manual.



Footnotes
Disconnect circuit power and discharge all high- voltage capacitors before testing resistance, continuity, diodes or capacitance.

Warnings
Use caution with voltages above 30VACrms, 42VAC peak or 60VDC. These voltages pose a shock hazard.