FLUKE FLUKE-117 CAL Datasheet & Stock

The FLUKE-117 CAL is a compact true-rms electrician's multimeter with non-contact voltage measurement for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster. It has 600.0mV DC millivolts, 6.000V to 600.00V DC volts, 600.0V auto volts, 600.0mV AC millivolts true-rms, 6.000V to 600.0V AC volts true-rms, 600 ohm continuity, 600 ohm to 40Mohm resistance, 2.00V/0.001V diode test, 1000nF to > 1000µF capacitance, 1nF to 500µF Lo-Z capacitance, 6.000A to 10.00A AC amps true-rms (45Hz to 500Hz), 6.000A to 10.00A DC amps and 99.99Hz to 50KHz frequency (V or A input). It complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 6101B (2003) and IEC/EN 61010-1 2nd edition for measurement Category III, 600V, pollution degree 2, EMC EN61326-1UL, CSA, CE, TUV, VDE standards and safety rated to CAT III 600V.




Calibrated electrician's multimeter

Low input impedance helps to prevent false readings due to ghost voltage

UL, CE, CSA, TUV, (N10140), VDE certified

Large white LED backlight to work in poorly lit areas, display hold, auto/manual ranging

Min/max/average with elapsed time to record signal fluctuations

Compact ergonomic design for one handed operation, low battery indication

AutoVolt (automatic AC/DC voltage selection), VoltAlert (non-contact voltage detection)

9V alkaline, NEDA 1604A/ IEC 6LR61 battery with 400hour life typical without backlight

6000 counts digital display (updates 4 per second), 33 segments bar graph (updates 32 per second)

167mm x 84mm x 46mm size, 550g weight, -10 to 50°C operating temperature





Applications


Test & Measurement






Contents

FLUKE-117 multimeter, 4mm silicone test lead set, Holster, User manual, 9V battery (installed).



Footnotes
Only use test leads that have the same voltage, category and amperage ratings as the meter and that have been approved by a safety agency.

Warnings
Use caution with voltages above 30VACrms, 42VACpeak, or 60VDC. These voltages pose a shock hazard.