Grayhill 62AG22L5060C Optical Rotary Encoder

Grayhill 62AG22L5060C Optical Rotary Encoder Specifications:

• Operating Temperature: −40 °C to 85 °C
• Storage Temperature: −40 °C to 85 °C
• Humidity: 96 hours@90-95% humidity@40 °C
• Mechanical Vibration: Harmonic motion with amplitude of 15g within a varied frequency of 10 to 2000 Hz for 12 hours
• Mechanical Shock: 100g for 6 ms half-sine wave with a velocity change of 12.3 ft/s
• Operating Voltage (AG Style): 5.00 ± 0.25 Vdc
• Operating Voltage (VG Style): 3.30 ± 0.125 Vdc
• Supply Current: 30 mA maximum
• Logic High (AG Style): ≥ 3.0 Vdc
• Logic Low (AG Style): ≤ 1.0 Vdc
• Logic High (VG Style): ≥ 2.0 Vdc
• Logic Low (VG Style): ≤ 1.0 Vdc
• Average Rotational Torque (Low): 2.0 ± 1.4 in-oz initially
• Average Rotational Torque (High): 3.5 ± 1.4 in-oz initially
• Mechanical Life: 1,000,000 cycles
• Mounting Torque: 15in-lbs. maximum
• Shaft Pushout Force: 45 lbs. minimum
• Terminal Strength: 15 lbs. Cable pull out force minimum
• Solderability: 95% free of pin holes & voids
• Maximum rotational speed: 100 rpm
• Pushbutton Rating: 10 mA @ 5 Vdc
• Pushbutton Contact Resistance: <10 Ω
• Pushbutton Life: 1 million actuations minimum
• Pushbutton Contact Bounce: <4 ms make, <10ms break
• Pushbutton Actuation Force (5): 510 ± 150 grams
• Pushbutton Actuation Force (9): 950 ± 200 grams
• Bushing Material: Zamak 2
• Shaft Material: Zamak 2
• Detent Rotor Material: Reinforced Nylon Zytel 70G33L UL 94
• Detent Spring Material: 303 Stainless Steel
• Housing (Upper) Material: Nylon 6/6 25% glass reinforced. Zytec FR-50
• Light Pipe Material: Lexan, GE
• Code Rotor Material: Delrin 100
• Housing (Lower) Material: Nylon 6/6 25% glass reinforced. Zytec FR-50
• Pushbutton Actuator Material: Reinforced nylon. Zytel 70G33L. UL 94
• Pushbutton Dome Material: Stainless Steel
• Printed Circuit Board Material: NEMA Grade FR4, Double clad with copper, Plated with gold over nickel
• Infrared Emitting Diode Material: Gallium Arsenide
• Phototransistor Diode Material: NPN Silicon
• Resistor Material: Metal oxide on ceramic substrate
• Spacer Material: Pet plastic
• Backplate Material: Stainless Steel
• Label Material: TT406 thermal transfer cast film
• Solder Material: 96.5% tin / 3% silver / 0.5% copper
• Hex Nut Material: Brass, Plated with nickel
• Lockwasher Material: Zinc Plated Spring Steel with Clear Trivalent Chromate Finish
• Cable Material: Copper Stranded with topcoat in PVC insulation
• Connector Material: PA4.6 with tin/nickel plated phosphor bronze