Grayhill 67C008MP Hall Effect Joystick

Grayhill 67C008MP Hall Effect Joystick Specifications:

• Operating Voltage on Pin 6 (VDD): 5.0 ± 0.25V
• Absolute Maximum Voltage* on Pin 6 (VDD): -0.3 V min, 6.5 V max
• Operating Current: 8 mA typ., 12 mA, max
• Sensing Method: Hall effect, proportional to angle of deflection
• Output Voltage (Pins 7 & 8): Analog (Ratiometric to Operating Voltage)
• Output at Center Position: 50% VDD
• Output at Full Travel: 10% VDD (for X-, Y- directions) 90% VDD (for X+, Y+ directions)
• Output Tolerance: ± 2% VDD (at Center and at Full Travel)
• Output Current: 200 µA, max
• Angle of Throw: 6.5° + 2° / -1° in main directions; 9.0° ± 0.1° in diagonals
• Life: 500,000 actuations in each of the four main directions
• Rating (Pushbutton): 10 mA at 5 Vdc resistive
• Absolute Maximum Voltage* on Pins 2 & 3: 6.0 V
• Contact Resistance (Pushbutton): less than 10 ohms
• Life (Pushbutton): 1 million actuations minimum
• Contact Bounce (Pushbutton): < 4 mS make, <10 mS break
• Actuation Force (Pushbutton): 960 ± 150 grams
• Pushbutton Travel: 0.025 ± 0.010 inches
• Output Code (Pins 4 & 5): 2-Bit quadrature: Channel "A" leads channel "B" by 90° electrically during clockwise rotation of the shaft
• Output Type: Push/Pull
• Output Low Voltage: 0.6V maximum for IOL = 2 mA
• Output High Voltage: 4.3V minimum for IOH = -1.5 mA, (VDD = 5.0V)
• Mechanical Life (Rotary): 1 million rotational cycles of operation
• Mounting Torque: 15 in-oz maximum
• Shaft Push-Out Force: 45 lbs minimum
• Shaft Pull-Out Force: 45 lbs minimum
• Solderability: 95% free of pin holes and voids
• Detents: 20 Position
• Torque: Initially 3.5 ± 1.5 in-oz average of all positions
• Operating Temperature Range: -40°C to 85°C
• Storage Temperature Range: -55°C to 100°C
• Relative Humidity: 96 hours at 90-95% humidity at 40°C
• Vibration: Harmonic motion with amplitude of 15g, within a varied 10 to 2000 Hz frequency for 12 hours
• Mechanical Shock: Test 1: 100g for 6ms half-sine wave; Test 2: 100g for 6ms sawtooth wave
• Pin Header Materials: Phosphor bronze; Insulator: Nylon 4/6; Plated with tin
• Cable Materials: Copper stranded with silver plating in PVC insulation, 28 AWG
• Connector Materials: Nylon 4/6; 30% Glass-filled; Tinplated phosphor bronze terminals
• Mounting Nut Materials: Polyurethane
• Shaft Materials: Thermoplastic
• Radiated Immunity: Passed 10 V/m: 80-2700 MHz per IEC 61000-4-3
• Conducted Immunity: Passed 10 V/m: 0.15 80 MHz per IEC 61000-4-6
• Radiated Emissions: Passed EN 55022 Class B
• Conducted Emissions: Passed EN 55022 Class B
• Electrostatic Discharge: Passed 15kV contact/25kV air discharge per IEC 61000-4-2
• Power Frequency Magnetic Field: Passed 30 A/m per IEC 61000-4-8