GW INSTEK GPS-3030DD CAL D Datasheet & Stock

The GPS-3030DD CAL D from GW Instek is a GPS series single output 90W linear DC power supply with 3 digits 0.39" digital LED display. It features overload and reverse polarity protection as well as high regulation and low ripple/noise that are maintained at 0.01% and 3A) (CV) and ≤ 0.2% + 3mA (CC). The ripple & noise is ≤ 0.5mVrms 5Hz ~ 1MHz (rating current ≤ 3A), ≤ 1mVrms 5Hz ~ 1MHz (rating current > 3A) (CV) and ≤ 3mArms ripple current (CC). It has insulation resistance of 20Mohm or above (DC 500V, chassis and terminal), 30Mohm or above (DC 500V, chassis and AC cord).




Calibrated with data linear DC power supply with Light and compact design

0V to 30V output voltage, 0A to 3A output current

0.01% high regulation, series or parallel operation

100V/120V/220V/240V±10%, 50/60Hz AC power source

Remote control for external programmability

Internal select for continuous or dynamic load, low ripple and noise

Recovery time of ≤ 100μS ( 50% load change, minimum load 0.5A) in CV mode

Temperature coefficient of ≤ 300ppm/°C in CV mode

128mm (W) x 145mm (H) x 285mm (D) dimension, 5Kg weight

Optional European type jack terminal 





Applications


Test & Measurement






Contents

GPS-3030DD power supply, User manual, Power cord, GTL-105A x 1 test lead, GTL-203A x 1 European test lead.



Footnotes
To avoid damaging the power supply, don’t use it in a place where ambient temperature exceeds 40°C.

Warnings
Voltages more than 60VDC are a lethal shock hazard to user. Careful when connecting power supplies in series to achieve voltages higher than 60VDC or 60VDC between any connection or earth ground.