GW INSTEK SPS-3610 CAL DU Datasheet & Stock

The SPS-3610 CAL DU from GW Instek is a SPS series, single output, 360W switching DC power supply. The overvoltage protection (OVP) protects the power supply and its load from unexpected conditions. High regulation is maintained at 0.01%. Remote sensing adds extra level of precision by compensating cable losses between loads. Turning the output on/off from external device is available through remote control terminals. The SPS-3610 has an insulation resistance of 20Mohm or above (DC 500V, chassis and terminal), 30Mohm or above (DC 500V, chassis and AC cord). It features constant voltage and constant current operation modes. It is an ideal solution for power efficient benchtop or portable applications requiring high regulation.




Calibrated with data and uncertainties switching DC power supply

Dual measurement display, high efficiency, high power density and remote output ON/OFF control

Output voltage range from 0V to 36V and output current range from 0A to 10A

Line regulation of ≤ 5mV(CV), ≤ 3mA (CC) and load regulation of ≤5mV (CV), ≤ 3mA (CC)

Ripple & noise of ≤5mVrms, 100mVp-p at 20Hz to 20MHz (CV) and ≤ 5mArms (CC)

Recovery time of ≤500µs (50% load change, minimum load 0.5A) (CV)

Meter with 3 1/2 digit, 0.39" LED display and ±(0.5% of rdg + 2digits) accuracy

Temperature coefficient of ≤ 100ppm/°C (CV)

115V/ 230V (±15%), 50Hz/60Hz AC power source

128mm (W) x 151mm (H) x 295mm (D) dimension, 3.2Kg weight, 0°C to 40°C operating temperature





Applications


Test & Measurement






Contents

SPS-3610 switching DC power supply, User manual, Power cord, GTL-203 x 1 test lead.



Footnotes
This equipment is not for measurements performed for CAT II, III and IV.

Warnings
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.