The HELLERMANNTYTON TREDUX HA47 thick wall heat shrink tubing is designed for insulation and protection of low and medium voltage power applications. Its adhesive liner provides a secure seal against moisture and environmental factors, while the tough polyolefin material ensures durability in exposed and underground cable joint scenarios. Pre-cut into convenient 3.28' (1.0m) sticks and packaged in a display box, this RoHS-approved tubing simplifies installation and offers reliable performance across a wide range of industrial applications.
Features and Benefits: Tubing is 3.5:1, thick wall adhesive lined. Toughness and weatherability is ideal for low and medium voltage power applications.
Length L (Imperial): 4.0 ft
Length L (Metric): 1.0 m
Printable: No
Shrink Ratio: up to 3.5:1
Tensile Strength (MPa): 14 MPa
Trade Size: 3-1/4
Variant: Thick-Wall
Voltage Range: Low and Medium Voltage
Volume Resistance (Ohm cm): 10¹ Ω cm
Nominal Diameter (Imperial): 3-1/4
Nominal Diameter (Metric): 85 mm
Wall Thickness WT (Imperial): 0.169
Wall Thickness WT (Metric): 4.3 mm
Recovered Diameter d (metric): 25.4 mm
Recovered Diameter d (imperial): 1.0
Supplied Diameter D (imperial): 3.346
Supplied Diameter D (metric): 85.0 mm
Quantity Per: pieces
Package Quantity (Metric): 1 Pieces
Weight (Metric): 1.26 kg
Weight (imperial): 2.78
Material: Polyolefin, cross-linked (PO-X)
Material Shortcut: PO-X
Adhesive: Hot melt adhesive
Dielectric Strength (Metric): 20 kV/mm
Elongation at break: 400%
Flammability: not flame retardant
Halogenfree: Yes
Shrink Temperature: +248 °F (+120 °C)
Operating Temperature: -67°F to +230°F (-55°C to +110°C)