IDEC HW1BV4Y 22mm Global Pushbutton

IDEC HW1BV4Y 22mm Global Pushbutton Specifications:

• Locking lever: Removable contact blocks
• Contacts: Finger-safe IP20 contacts
• Construction: Tamperproof
• E-stops compliance: EN418 and SEMI S2 standards
• Approvals: Worldwide approvals
• Front bezels: Choice of black plastic or metallic
• Illumination: Incandescent or LED
• Voltage: Transformer or full voltage
• Contacts type: Slow make double break self cleaning
• Rated Operational Characteristics AC-15: A600 or Ue = 250V, le = 3A (NO, NC, NO-EM, NC-LB)
• Rated Operational Characteristics DC-13: P600 or Ue = 125V, le = 1.1A (NO, NC)
• DC-13: Q600 or Ue = 125V, le = 0.9A (NO-EM, NC-LB)
• Maximum Inrush Current: 40 A (40 ms)
• Rated Insulation Voltage: 600V
• Rated Switching Over-Voltage: Less than 4kV, conforming to IEC60947-1
• Rated Impulse Withstanding Voltage: 4kV for contact circuit, 2.5kV for lamp circuit
• Rated Thermal Current: 10 Amp
• Minimum Switching Capacity: 5 mA at 3V AC/DC
• Electrical Reliability: MTBF < 1 fault for 10 million operation cycles (3V DC, 5mA)
• Incandescent Illumination: 1 W
• LED Illumination: 6V/17mA max, 12V & 24V/11mA max, 120 & 240V/10mA max
• Contact Operation: Slow break NC or NO, self-cleaning
• Travel to latch: 5.5mm to 10mm
• Minimum force to latch: 45N
• Maximum travel (Positive Action Operation): 10mm
• Operations per hour (Pushlock Turn Reset): 1,800
• Operations per hour (Push-Pull): 900
• Operating Force (momentary pushbuttons): 6.2±2N
• Operating Force (maintained pushbuttons): 7.0±2N
• Additional contacts (momentary): +3.2N
• Additional contacts (maintained): + 3.3N
• Recommended Terminal Torque: 0.8 N m (7.1 in lb.)
• Applicable Wire Size: Minimum 1 x 22 AWG, max. 2 x 14 AWG or 1 x 12 AWG
• Contact Resistance: 50mΩ or less
• Contact Gap: 4mm (NO and NC), 2mm (NO-EM and NC-LB)
• Horsepower Rating: 1/4 HP @ 120V (1ø non-reversing), 1HP @ 240V (3ø non-reversing)
• Contact Material: Silver (gold plated contacts available)
• Operating Temperature: –25 to +50°C (without freezing), Storage: –40 to +70°C (without freezing)
• Vibration Resistance: 10 to 55Hz, 98m/sec [2] (10G) conforming to IEC6068-2-6
• Shock Resistance: 980m/sec [2] (100G) conforming to IEC6068-2-7
• Mechanical Life: Momentary pushbuttons: 5,000,000, All other switches: 500,000
• Conforming to Standards: EN60947-1, EN60947-5-1, VDE0660-200, UL508, CSA C22-2 No.14
• CSA: A600
• UL: A600
• TÜV: A600=P600 (NO, NC)
• Electrical Shock Protection Class: 0 conforming to IEC60536
• Degree of Protection: IP65 (from front of the panel), IP20 (Type HW-F contact block)
• Pollution Degree: 3 for switches not using a transformer, 2 for switches using a transformer
• External Short-Circuit Protection: 10A 250V fuse conforming to IEC60269-1
• Terminal Referencing: Conforming to CENELEC EN50005
• Contact Block Type: HW-C/HW-F /HW-G