MAXIM INTEGRATED / ANALOG DEVICES DS1077Z-133+ Datasheet & Stock

The DS1077Z-133+ is an EconOscillator/divider in 8 pin NSOIC package. This is a dual output, programmable, fixed frequency oscillator requiring no external components for operation. The DS1077 can be used as a processor-controlled frequency synthesizer or as a standalone oscillator. The two synchronous output operating frequencies are user-adjustable in submultiples of the master frequency through the use of two on-chip programmable prescalers and a divider. The specific output frequencies chosen are stored in NV memory. The DS1077 defaults to these values upon power-up. The DS1077 features a 2 wire serial interface that allows in-circuit on-the-fly programming of the programmable prescalers (P0 & P1) and divider (N) with the desired values being stored in NV (EEPROM) memory. Design changes can be accommodated in-circuit on-the-fly by simply programming different values into the device.




Supply voltage range is 4.75V to 5.25V

Operating temperature range from -40°C to 85°C

Standard frequency output range from 133.333MHz to 16.2KHz

±0.5% variation over temp (+25°C to +70°C)

±0.5% initial tolerance

Dual low jitter, synchronous fixed frequency outputs

Power-down mode

Synchronous output gating





Applications


Clock & Timing,

Portable Devices