MAXIM INTEGRATED / ANALOG DEVICES DS1250Y-70IND+ Datasheet & Stock

The DS1250Y-70IND+ is a 4096k non-volatile SRAM in 32 pin EDIP package. This fully static SRAM is organized as 524,288 words by 8 bits. Each complete NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out of tolerance condition. Whenever this condition occurs, the lithium energy source is automatically switched on and the write protection is unconditionally enabled to prevent data corruption. This device can be used in place of existing 512k x 8 static RAMs directly conforming to the popular byte-wide standard. It is normally paired with a DS9034PC PowerCap to form a complete non-volatile SRAM module and there is and no additional support circuitry required for microprocessor interfacing.




Supply voltage range is 4.5V to 5.5V

Operating temperature range from -40°C to 85°C

10 years minimum data retention in the absence of external power

Replaces 512K x 8 volatile static RAM, EEPROM or flash memory

Full ±10% VCC operating range (DS1250Y)

Unlimited write cycles

Read and write access time of 70ns

Write protection voltage is 4.25V to 4.5V

Data is automatically protected during power loss

Built-in switch disconnects the lithium source until the user first applies VCC





Applications


Embedded Design & Development





Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.