MAXIM INTEGRATED / ANALOG DEVICES DS1312S-2+ Datasheet & Stock

The DS1312S-2+ is a non-volatile controller with lithium battery monitor in 8 pin NSOIC package. This non-volatile controller with battery monitor is a CMOS circuit which solves application problem of converting CMOS RAM into non-volatile memory. Incoming power is monitored for an out of tolerance condition. When such a condition is detected, chip enable is inhibited to accomplish write protection and the battery is switched on to supply the RAM with uninterrupted power. Special circuitry uses a low leakage CMOS process which affords precise voltage detection at extremely low battery consumption. In addition to battery backup support device performs important function of monitoring remaining capacity of lithium battery and providing a warning before battery reaches end of life.




Supply voltage range is 4.5V to 5.5V

Operating temperature range from -40°C to 85°C

Converts CMOS SRAM into non-volatile memory

Unconditionally write protects SRAM when VCC is out of tolerance

Automatically switches to battery backup supply when VCC power failure occurs

Monitors voltage of a lithium cell and provides advanced warning of impending battery failure

Signals low battery condition on active low battery warning output signal

Space saving package

Resets processor when power failure occurs, hold processor in reset during system power-up





Applications


Embedded Design & Development





Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.