MAXIM INTEGRATED / ANALOG DEVICES MAX11604EEE+ Datasheet & Stock

The MAX11604EEE+ is a low power, 8bit, 12-channel analogue to digital converter (ADC) in 16 pin QSOP package. This device has internal track/hold (T/H), voltage reference, clock and an I2C compatible 2-wire serial interface. It operates from a single supply and requires only 350μA supply current at maximum sampling rate of 188Ksps. AutoShutdown feature power down the device between conversions by reducing supply current to less than 1μA at low throughput rate. The analogue inputs are software configurable for unipolar or bipolar and single ended or pseudo differential operation. The full scale analogue input range is determined by internal reference or by an externally applied reference voltage ranging from 1V to VDD. The MAX11604 is used in battery powered test equipment, solar powered remote systems, received signal strength indicators and system supervision.




Supply voltage range from 4.5V to 5.5V

Operating temperature range from -40°C to 85°C

Internal reference of 4.096V and internal clock

12-channel single ended or 6-channel pseudo differential

Internal FIFO with channel scan mode

INL of ±1LSB and DNL of ±1LSB (no missing codes over temperature)

Offset error of ±1.5LSB and gain error of ±1LSB

Maximum total unadjusted error (TUE) of ±1LSB

Full power bandwidth of 2MHz (-3dB point) and full linear bandwidth of 200KHz (SINAD > 49dB)





Applications


Signal Processing,

Portable Devices,

Medical





Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.