MAXIM INTEGRATED / ANALOG DEVICES MAX1242BEPA+ Datasheet & Stock

The MAX1242BEPA+ from Maxim Integrated Products is a 2.7V to 5.25V, low power, 10bit serial ADC in 8 pin PDIP package. It features a 7.5µs successive approximation ADC, a fast track/hold (1.5µs), an on-chip clock and a high speed, 3-wire serial interface. It has an internal 2.5V reference. An external clock access data from 3-wire interface which connects directly to standard microcontroller I/O ports. The interface is compatible with SPI, QSPI and MICROWIRE®. The excellent AC characteristics and very low power combined with ease of use and small package size makes converter ideal for remote sensor and data acquisition applications or for other circuits with demanding power consumption and space requirements. This device is used in isolated data acquisition, portable data logging and temperature measurement. It is used in portable data logging, test equipment, isolated data acquisition, process control monitoring and temperature measurement.




Supply voltage range is 2.7V to 5.25V

Operating temperature range from -40°C to 85°C

Low power of 3.7mW at 73Ksps, 5µW at power-down mode

Maximum relative accuracy is ±1LSB

Differential nonlinearity is ±1LSB at no missing codes over temperature

Gain temperature coefficient of ±0.25ppm/°C

Small-signal bandwidth at -3dB roll off is 2.25MHz

Maximum conversion time is 7.5µs

Throughput rate of 73Ksps at fSCLK = 2.1MHz

SINAD is 66dB, THD is -70dB ( Up to the 5th harmonic ) & SFDR is 70dB





Isolated Data Acquisition; Portable Data Logging; Process Control Monitoring; Temperature Measurement; Test Equipment