MEGGER DLRO10X CAL Datasheet & Stock

The DLRO10X CAL from Megger is a digital low resistance ohmmeter with bright 4 ½ large, backlit LCD display. For users who desire more control over the measurement process, DLRO 10X uses a menu system controlled by a two-axis paddle to allow the user to manually select the maximum test current. DLRO 10X also adds real time download of results and on board storage for later download to a PC. Measurements are made with forward and reverse currents to cancel the effects of any standing voltages across the test sample. This is small, lightweight and portable can be used in tight places, four terminal resistance methods show the true resistance of the item under test. It checks for undue noise during measurement, reducing the possibility of recording the incorrect result and automatically detects continuity in P and C circuits, preventing erroneously high reading to be taken due to high resistance contact.




Calibrated ohmmeter, real time or from storage via RS232

Manual, auto, continuous, inductive and unidirectional measurement modes

Fully automatic/manual measurement control,

Single cycle reversing DC ratiometric measurement-average result display

Test current accuracy of ±10%, test current stability

Voltmeter input impedance >200Kohm, 2000m (6562ft) to full safety specifications

In accordance with IEC61010-1, CATIII 600V Safety standards (only when DH6 leads are used)

Operating temperature range from +5°C to +45°C (full accuracy), -10°C to +50°C (reduced accuracy)

700 tests, 7Ah NiMH rechargeable battery, 2.5hr to 90% capacity, 4hr to fully charged & 2.6Kg weight

Dimension is 220mm x 100mm x 237mm, up to 200 characters per test via integral alphanumeric keypad





Applications


Test & Measurement






Contents

DLRO10X digital low resistance ohmmeter, 6111-428 7 Ah NiMH battery module, 6111-503 DH4 duplex handspikes, One with indicator lights (1.2m / 4ft), 6280-333 battery charger, 6280-332 cigarette lighter charger, User guide and warranty book.