MEGGER MPQ1000 Silver Kit Datasheet & Stock

Megger MPQ1000SILVERKIT Offers

The advanced PQ recording and analysis the MPQ-1000 coupled with its simplicity makes the analyzer the ideal unit to perform power quality studies, energy audits, load studies, troubleshoot industrial and commercial issues, lighting issues, motor start up, solar panel effects, reactive energy analysis and more. The analyzers scope mode and DMM mode allows the user to perform troubleshooting on the spot as well as performing extended recordings.

The auto CT identification eliminates potential errors due to wrong CT range settings. Simple connection with a push of a button and the analyzer will automatically identify the CT and verify it is connected correctly. This means you can be confident you will have the correct data.

The unit will fit into most locations and supports either Wi-Fi or cellular with the use of an off the shelf bridge. A bridge is the opposite of a router. It receives a wireless signal and transmits the signal over a wire. The bridge connects to the Ethernet port on the instrument. The bridge can be bought off the shelf at different stores. The advantage is it can be moved from unit to unit as needed, since it is not internal to the unit. A class A instrument performs its measurements per the requirements of IEC61000-4-30 and IEEE-1159. This provides a measurement accuracy of 0.1% over the given range. Units that comply to this standard ensure their measurements will agree with one another. Instruments that are not class A can have different measurement values. Most revenue meters are now measure class A RMS value. Therefore to get matching data a class A instrument is required. The unit will trend harmonics through the 50th order. The Megger PQ software will analyze the captured waveforms through the 128th order.

Features

32 GB SD card standard allows user to load recordings directly into a PC (with no additional download routine)
PQ analysis can be done in the field on the MPQ1000 screen
Comes complete with powerful PQ Analysis Software at no additional charge
Automatic CT recognition means never having the unit programmed for an incorrect range
CTs are powered by the unit so there is no need for additional connections
Connection verification ensures the unit is configured correctly and you get the data you need — no wasted recordings
On-board data analysis saves time by allowing an immediate examination of data before leaving the site
Multiple communication methods (USB, Ethernet, USB stick or SD card) allow for flexible and convenient operation
Removable SD card allows for large recording capabilities and simple memory expansion
The expanded 1000 V AC range allows for more application; no need for a second unit
1000 V DC measurement allows testing and analysis of renewable applications dismissing the need for additional equipment
CATIV @ 600 V assures a safe unit for all applications
Full-featured Class A compliant (all parameters) ensures the recording of correct values
Smart configuration in the Megger PQ software for quick and easy setup
Phase angle stability measurement lets you easily find tricky phasing problems caused by multiple erratic sources. Timed waveform capture allows for the taking of PQ events and periodic waveforms at the same time
Easy intuitive menus allow for simple navigation and operation
Free software included means no license or dongle required
International Standards and Recommendations: IEC61000-4-30, EN50160, IEEE1159, IEEE519


Measured Parameters

RMS voltage / current
DC voltage
DC current (requires dc CT)
Phase-to-phase voltage
Power parameters (KW, KVAR, KVA, DPF, TPF)
Voltage sag/dips and swells
Phase angles
Current sags/dips and swells
Transient down to 1 msec
IEC unbalance
Frequency
Event waveform capture
Total harmonic distortion
Total demand distortion
Harmonics
Inter-harmonics
Energy parameters (KWH, KVARH, KVAH)
Mains signaling
Harmonic direction
IEC flicker
Rapid voltage change
Phase angle deviation
ANSII unbalance
Timed waveform capture



A telecommunications company can save money, improve quality and reliability to periodically monitor their incoming power quality and their energy usage. By owning a simple and easy-to-use Power Quality device, telecom companies can perform their own periodic assessments without the cost of employing outside service companies to perform these tests. The Megger family of Power Quality products offers the ability, with their one-touch recording, auto-data analysis and unrivaled software.

Applications

Compliance testing to any PQ standard
Power factor studies
Load studies and load balancing
Billing verification
Substation monitoring
Capacitor bank sizing
Transformer analysis and de-rating
Motor troubleshooting and inrush testing
Switchgear and component failure
Tripping breakers
Equipment tripping offline
Dimming/surging lighting
Neutral overheating
Solar (PV) analysis
Utilities troubleshooting
Substation Testing
Industrial Sites
Engineering / Test Firms
Commercial Companies


Benefits

Auto CT Detection: The unit not only identifies the CT is connected but also identifies the range the selected range of the current clamp. Never make a mistake programming the wrong range.
Configuration Verification: Verifies the instrument is connected properly BEFORE the recording begins. This ensures the recorded data is valid. No wasted recordings and No wasted time.
On board Data Analysis: Analyze the data in the field on the spot! Saves time by allowing an immediate examination of the data before leaving the site.
Scope Mode: Examine real time waveforms, examine real time phase angles with the vector scope, and examine real time harmonics and inter-harmonics. Find PQ problems without performing an extended recording.
SD Card / USB Stick Support: Transfer data and setup configurations without the need of a PC. Just remove and replace the SD Card and start a new recording in a different location. Saves time and effort.
Timed Waveform Capture: Capture waveforms not only for power quality events but also capture periodic waveforms at the same time. Perform advanced Fourier Analysis of your system!
High end FREE PC Software. No license required, no dongle required. Custom configuration wizard, data analysis, harmonic analysis, waveform analysis up to the 128th harmonic, harmonic direction and more.


Megger PQ Firmware for MPQ Series PQ Analyzers
This firmware adds the following functionality to both the MPQ1000 and MPQ2000.

Enables the AUTO voltage recognition
Allows the changing of CT values in the default setup files
This firmware corrects the following bugs in both the MPQ1000 and MPQ2000