MILL MAX 806-22-001-30-014191 Datasheet & Stock

The 806-22-001-30-014191 from Mill Max is an 806 series surface mount spring loaded pin with removable pick and place cap for automated assembly. It features standard Mill-Max spring pin with removable cap which keep parts centred in the carrier tape pocket, present a large round target surface for vacuum pick up and are easily removed after the soldering process. This spring loaded pin is an ideal solution for applications in which the production volume necessitates automatic assembly yet an insulator is not required or feasible. The removable cap attach to body of spring pin, slipping over without compressing or damaging the plunger. The four finger design creates compliancy making the cap easy to remove. The closed flat top ensures reliable vacuum pick up every time. The removable cap is made of high temperature nylon 46 and is suitable for most soldering processes. Mill-Max spring pin feature precision-machined external components and high reliability internal springs.




Cap can be easily removed after soldering leaving only the spring pin on the board

Initial height is 0.295inch, full stroke range is 0.50inch to 0.55inch

Working travel is 0.0275inch, sleeve height is 0.220inch

Gold plated component and spring ensures highest conductivity, corrosion resistance and durability

Beryllium copper plated 10μ" gold plated spring

UL94 V-0 rated high temperature thermoplastic insulator, 1000000 cycles durability

Machined copper alloy plated 20μ" gold over 100μ" nickel contact piston & base

Spring force at initial height is 25grams and spring force at 60grams mid stroke

Current rating is 2A (continuous), 3A (peak) per contact

Maximum contact resistance is 20mohm and minimum insulation resistance is 10000Mohm