MONOLITHIC POWER SYSTEMS (MPS) MP5094GJ-Z Datasheet & Stock

The MP5094 is a protection device designed to protect circuitry on the output from transients on the input. The MP5094 also protects the input from undesired shorts and transients coming from the output. The MP5094 is a small RDS(ON), low quiescent current, dual-channel, current-limited switch. During start-up, the inrush current is limited by limiting the slew rate at the output. The slew rate is controlled by a capacitor at the SS pin. The maximum load at the output is current-limited. The magnitude of the current limit is fixed internally. The output voltage is limited by an output over-voltage protection (OVP) function.




Integrated 5V, 12V input dual E-fuse

24V 100ms maximum surge input voltage tolerance for 12V bus

16V 100ms maximum surge input voltage tolerance for 5V bus

50mohm/30mohm low RDS(ON) for 12V bus/5V bus current-limit switch

110μA typical low quiescent current for 12V bus/5V bus

Adjustable soft-start time

Fixed 4A/2.95A trip/hold current limit for 12V bus

Fixed 3A/2.18A trip/hold current limit for 5V bus

Over-current protection (OCP) hiccup

Latch-off thermal shutdown




Footnotes
MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.

Warnings
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.