Phoenix Contact 2775207 Feed-Through Terminal Block

Phoenix Contact 2775207 Feed-Through Terminal Block Specifications:

• Number of levels: 1
• Number of connections: 4
• Nominal cross section: 4 mm²
• Color: gray
• Insulating material: PA
• Flammability rating according to UL 94: V2
• Maximum load current: the current is determined by the component used
• Rated surge voltage: 8 kV
• Degree of pollution: 3
• Overvoltage category: III
• Insulating material group: I
• Nominal current IN: 32 A
• Nominal voltage UN: 630 V
• Open side panel: Yes
• Shock protection test specification: DIN EN 50274 (VDE 0660-514):2002-11
• Finger protection: guaranteed
• Result of surge voltage test: Test passed
• Result of power-frequency withstand voltage test: Test passed
• Power frequency withstand voltage setpoint: 3 kV
• Result of the test for mechanical stability of terminal points: Test passed
• Result of bending test: Test passed
• Bending test conductor cross section/weight: 0.2 mm² / 0.2 kg, 4 mm² / 0.9 kg, 6 mm² / 1.4 kg
• Tensile test result: Test passed
• Conductor cross section tensile test: 0.2 mm²
• Tractive force setpoint: 10 N
• Conductor cross section tensile test (4 mm²): 60 N
• Conductor cross section tensile test (6 mm²): 80 N
• Result of tight fit on support: Test passed
• Setpoint (tight fit): 1 N
• Result of voltage-drop test: Test passed
• Result of temperature-rise test: Test passed
• Result of thermal test: Test passed
• Proof of thermal characteristics (needle flame) effective duration: 30 s
• Relative insulation material temperature index (Elec., UL 746 B): 125 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 125 °C
• Width: 6.2 mm
• End cover width: 1.5 mm
• Length: 63.5 mm
• Height NS 35/7,5: 47 mm
• Height NS 35/15: 54.5 mm
• Height NS 32: 52 mm
• Connection method: Screw connection
• Conductor cross section solid min.: 0.2 mm²
• Conductor cross section solid max.: 6 mm²
• Conductor cross section AWG min.: 24
• Conductor cross section AWG max.: 10
• Conductor cross section flexible min.: 0.2 mm²
• Conductor cross section flexible max.: 4 mm²
• Min. AWG conductor cross section, flexible: 24
• Max. AWG conductor cross section, flexible: 10
• Conductor cross section flexible, with ferrule without plastic sleeve min.: 0.25 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.: 4 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.: 0.25 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.: 1.5 mm²
• Cross section with insertion bridge, solid max.: 2.5 mm²
• Cross section with insertion bridge, stranded max.: 2.5 mm²
• 2 conductors with same cross section, solid min.: 0.2 mm²
• 2 conductors with same cross section, solid max.: 1 mm²
• 2 conductors with same cross section, stranded min.: 0.2 mm²
• 2 conductors with same cross section, stranded max.: 1.5 mm²
• 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min.: 0.5 mm²
• 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max.: 1 mm²
• 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min.: 0.25 mm²
• 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max.: 1.5 mm²
• Stripping length: 8 mm
• Internal cylindrical gage: A4
• Screw thread: M3
• Tightening torque, min: 0.5 Nm
• Tightening torque max: 0.6 Nm
• eCl@ss 4.0: 27141120
• eCl@ss 4.1: 27141120
• eCl@ss 5.0: 27141120
• eCl@ss 5.1: 27141120
• eCl@ss 6.0: 27141120
• eCl@ss 7.0: 27141120
• eCl@ss 8.0: 27141120
• eCl@ss 9.0: 27141120
• ETIM 2.0: EC000897
• ETIM 3.0: EC000897
• ETIM 4.0: EC000897
• ETIM 5.0: EC000897
• UNSPSC 6.01: 30211811
• UNSPSC 7.0901: 39121410
• UNSPSC 11: 39121410
• UNSPSC 12.01: 39121410
• UNSPSC 13.2: 39121410