Phoenix Contact 2814728 MCR Current Measuring Transducer

Phoenix Contact 2814728 MCR Current Measuring Transducer Specifications:

• Packing unit: 1 pc
• Weight per Piece (excluding packing): 179.2 g
• Custom tariff number: 85437090
• Country of origin: Germany
• Utilization restriction: EMC: class A product, see manufacturer's declaration
• Width: 22.5 mm
• Height: 99 mm
• Depth: 114.5 mm
• Ambient temperature (operation): -20 °C ... 60 °C
• Ambient temperature (storage/transport): -40 °C ... 85 °C
• Degree of protection: IP20
• Input current range: 0 A ... 55 A (AC/DC)
• Operate threshold: 0.8 % (of measuring range nominal value 50 A)
• Setting range for min. input current: 0 A ... 9.5 A
• Setting range for max. input current: 0 A ... 55 A
• Impulse form: AC, DC or distorted currents
• Frequency measuring range: 15 Hz ... 400 Hz
• Connection method (input): Through connection, diameter 10.5 mm
• Voltage output signal: 0 V ... 10 V, 5 V ... 1 V, 5 V ... -5 V, 2 V ... 10 V, -10 V ... 10 V, 0 V ... 5 V, 1 V ... 5 V, -5 V ... 5 V, 10 V ... 0 V, 10 V ... 2 V, 10 V ... -10 V, 5 V ... 0 V
• Current output signal: 0 mA ... 20 mA, 4 mA ... 20 mA, 20 mA ... 0 mA, 20 mA ... 4 mA
• Load/output load voltage output: > 10 kΩ
• Load/output load current output: < 500 Ω
• Supply voltage range: 20 V DC ... 30 V DC
• Max. current consumption: < 40 mA (without load)
• Connection method (power): Screw connection
• Conductor cross section solid min.: 0.2 mm²
• Conductor cross section solid max.: 2.5 mm²
• Conductor cross section AWG min.: 24
• Conductor cross section AWG max.: 14
• Conductor cross section flexible min.: 0.2 mm²
• Conductor cross section flexible max.: 2.5 mm²
• Stripping length: 8 mm
• Screw thread: M3
• Maximum transmission error: < 0.5 % (of nominal range value under nominal conditions)
• Temperature coefficient, typical: < 0.025 %/K
• Step response (10-90%): 330 ms (with AC), 40 ms (with DC)
• Status display: Green LED
• Overvoltage category: III
• Pollution degree: 2
• Rated insulation voltage: 300 V AC (to earth)
• Test voltage input/output: 4 kV (50 Hz, 1 min.)
• Test voltage input/power supply: 4 kV (50 Hz, 1 min.)
• Test voltage output/power supply: 500 V (50 Hz, 1 min.)
• Noise emission: EN 61000-6-4
• Noise immunity: EN 61000-6-2
• Housing material: Polyamide PA non-reinforced
• Mounting position: any
• Conformance: CE-compliant
• UL, USA / Canada: Class I, Zone 2, AEx nC IIC T6, Ex nC IIC T6
• eCl@ss 4.0: 27200303
• eCl@ss 4.1: 27200303
• eCl@ss 5.0: 27200303
• eCl@ss 5.1: 27200303
• eCl@ss 6.0: 27200303
• eCl@ss 7.0: 27142316
• eCl@ss 8.0: 27210123
• ETIM 2.0: EC001440
• ETIM 3.0: EC001440
• ETIM 4.0: EC001440
• ETIM 5.0: EC002475
• UNSPSC 6.01: 30211506
• UNSPSC 7.0901: 39121008
• UNSPSC 11: 39121008
• UNSPSC 12.01: 39121008
• UNSPSC 13.2: 39121008