Phoenix Contact 2881036 VAL-CP-1S Surge Arrester

Phoenix Contact 2881036 VAL-CP-1S Surge Arrester Specifications:

• Packing unit: 1 pc
• GTIN: 4046356049252
• Weight per Piece (excluding packing): 220.000 g
• Custom tariff number: 85363030
• Country of origin: Germany
• Height: 90 mm
• Width: 25.3 mm
• Depth: 71.5 mm
• Horizontal pitch: 1.4 Div.
• Degree of protection: IP20
• Ambient temperature (operation): -40 °C ... 80 °C
• Ambient temperature (storage/transport): -40 °C ... 80 °C
• Altitude: ≤ 2000 m (amsl)
• Permissible humidity (operation): 5 % ... 95 %
• Shock (operation): 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
• Vibration (operation): 5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
• IEC test classification: II
• EN type: T2
• IEC power supply system: TN-S, TT
• Mode of protection: L-N, L-PE, N-PE
• Mounting type: DIN rail: 35 mm
• Color: gray/blue, black
• Housing material: PBT-FR
• Degree of pollution: 2
• Flammability rating according to UL 94: V-0
• Type: DIN rail module, two-section, divisible
• Number of positions: 2
• Surge protection fault message: optical
• Nominal voltage UN: 240 V AC (TN-S), 240 V AC (TT)
• Nominal frequency fN: 50 Hz (60 Hz)
• Maximum continuous operating voltage UC(L-N): 350 V AC
• Maximum continuous operating voltage UC(L-PE): 350 V AC
• Maximum continuous voltage UC(N-PE): 264 V AC
• Rated load current IL: 40 A (Biconnect M4 fork-type cable lug 6 mm²), 63 A (TWIN ferrule 2 x 10 mm²)
• Residual current IPE: ≤ 1 µA
• Nominal discharge current In(8/20) µs (L-N): 20 kA
• Nominal discharge current In(8/20) µs (N-PE): 20 kA
• Maximum discharge current Imax(8/20) µs (L-N): 40 kA
• Maximum discharge current Imax(8/20) µs (N-PE): 40 kA
• Follow current interrupt rating Ifi(N-PE): 100 A (264 V AC)
• Short-circuit current rating ISCCR: 25 kA
• Voltage protection level Up(L-N): ≤ 1.5 kV
• Voltage protection level Up(L-PE): ≤ 1.9 kV
• Voltage protection level Up(N-PE): ≤ 1.5 kV
• Residual voltage Ures(L-N): ≤ 1.5 kV (at In), ≤ 1.3 kV (at 10 kA), ≤ 1.2 kV (at 5 kA), ≤ 1.1 kV (at 2 kA)
• Residual voltage Ures(N-PE): ≤ 0.5 kV (at In), ≤ 0.5 kV (at 10 kA), ≤ 0.5 kV (at 5 kA), ≤ 0.5 kV (at 4 kA), ≤ 0.5 kV (at 2 kA)
• TOV behavior at UT(L-N): 415 V AC (5 s / withstand mode), 440 V AC (120 min / safe failure mode)
• TOV behavior at UT(N-PE): 1200 V AC (200 ms / withstand mode)
• Response time tA(L-N): ≤ 25 ns
• Response time tA(N-PE): ≤ 100 ns
• Max. backup fuse with V-type through wiring: 40 A (gG / Biconnect M4 fork-type cable lug, 6 mm²), 63 A (gG / TWIN ferrule 2x 10mm²)
• Max. backup fuse with branch wiring: 315 A (gG)
• Connection method: Screw connection
• Screw thread: M5
• Tightening torque: 4.5 Nm
• Stripping length: 16 mm
• Conductor cross section flexible: 2.5 mm² ... 16 mm²
• Conductor cross section solid: 2.5 mm² ... 25 mm²
• Conductor cross section AWG: 12 ... 4
• SPD Type: 4CA
• Maximum continuous operating voltage MCOV (L-N): 350 V AC
• Maximum continuous operating voltage MCOV (L-G): 350 V AC
• Maximum continuous operating voltage MCOV (N-G): 264 V AC
• Nom. voltage: 240 V AC
• Measured limiting voltage MLV (L-N): 2000 V
• Measured limiting voltage MLV (L-G): 2080 V
• Measured limiting voltage MLV (N-G): 950 V
• Nominal discharge current In(L-N): 20 kA
• Nominal discharge current In(L-G): 20 kA
• Nominal discharge current In(N-G): 20 kA