Phoenix Contact 2900525 Safety Relay Module

Phoenix Contact 2900525 Safety Relay Module Specifications:

• Packing unit: 1 pc
• Weight per Piece (excluding packing): 240.0 g
• Custom tariff number: 85371099
• Country of origin: Germany
• Utilization restriction: EMC: class A product, see manufacturer's declaration
• Width: 22.5 mm
• Height: 99 mm
• Depth: 114.5 mm
• Ambient temperature (operation): -20 °C ... 55 °C
• Ambient temperature (storage/transport): -40 °C ... 70 °C
• Max. permissible relative humidity (operation): 75 % (on average, 85% infrequently, non-condensing)
• Max. permissible humidity (storage/transport): 75 % (on average, 85% infrequently, non-condensing)
• Maximum altitude: ≤ 2000 m
• Nominal input voltage UN: 24 V AC/DC
• Input voltage range in reference to UN: 0.85 ... 1.1
• Typical input current at UN: 140 mA AC / 65 mA DC
• Voltage at input/start and feedback circuit: approx. 24 V DC
• Typical response time (manual start): 20 ms
• Typical response time (automatic start): 150 ms
• Typical release time (single-channel): 45 ms
• Typical release time (two-channel): 10 ms
• Concurrence input 1/2: ∞
• Recovery time: 1 s
• Status display: Green LED
• Max. permissible overall conductor resistance: approx. 50 Ω
• Contact type: 2 enabling current paths / 1 signaling current path
• Contact material: AgSnO2, + 0.2 µm Au
• Minimum switching voltage: 15 V AC/DC
• Maximum switching voltage: 250 V AC/DC
• Limiting continuous current (N/O contact): 6 A
• Inrush current, minimum: 25 mA
• Maximum inrush current: 6 A
• Sq. Total current: 72 A
• Interrupting rating (ohmic load) max. (24 V DC, τ = 0 ms): 144 W
• Interrupting rating (ohmic load) max. (48 V DC, τ = 0 ms): 288 W
• Interrupting rating (ohmic load) max. (110 V DC, τ = 0 ms): 77 W
• Interrupting rating (ohmic load) max. (220 V DC, τ = 0 ms): 88 W
• Interrupting rating (ohmic load) max. (250 V AC, τ = 0 ms): 1500 VA
• Maximum interrupting rating (inductive load) (24 V DC, τ = 40 ms): 48 W
• Maximum interrupting rating (inductive load) (48 V DC, τ = 40 ms): 40 W
• Maximum interrupting rating (inductive load) (110 V DC, τ = 40 ms): 35 W
• Maximum interrupting rating (inductive load) (220 V DC, τ = 40 ms): 35 W
• Switching capacity min.: 0.4 W
• Output fuse: 10 A gL/gG NEOZED (N/O contact) / 6 A gL/gG NEOZED (N/C contact)
• Relay type: Electromechanical relay with forcibly guided contacts
• Mechanical service life: Approx. 10,7 cycles
• Net weight: 137.48 g
• Mounting type: DIN rail mounting
• Degree of protection: IP54 / IP20
• Min. degree of protection of inst. location: IP54
• Mounting position: any
• Control: one and two channel
• Parameters as per EN ISO 13849: 4
• Stop category: 0
• Parameters for IEC 61508: 3
• Connection method: Screw connection
• pluggable: Yes
• Conductor cross section solid min.: 0.2 mm²
• Conductor cross section solid max.: 2.5 mm²
• Conductor cross section flexible min.: 0.2 mm²
• Conductor cross section flexible max.: 2.5 mm²
• Conductor cross section AWG min.: 24
• Conductor cross section AWG max.: 12
• Stripping length: 7 mm
• Screw thread: M3
• Designation: Air clearances and creepage distances
• Standards/regulations: DIN EN 50178/VDE 0160
• Rated insulation voltage: 250 V
• Rated surge voltage/insulation: 6 kV / Safe isolation, increased insulation
• Degree of pollution: 2
• Overvoltage category: III
• Safety Integrity Level Claim Limit (SIL CL): 3