Phoenix Contact 2903369 Relay Module

Phoenix Contact 2903369 Relay Module Specifications:

• Packing unit: 1 pc
• Minimum order quantity: 10 pc
• GTIN: 4046356732970
• Weight per Piece (excluding packing): 28.000 g
• Custom tariff number: 85364110
• Country of origin: Czech Republic
• Utilization restriction: EMC: class A product, see manufacturer's declaration
• Width: 6.2 mm
• Height: 93 mm
• Depth: 78 mm
• Ambient temperature (operation): -40 °C ... 60 °C
• Ambient temperature (storage/transport): -40 °C ... 85 °C
• Degree of protection: IP20 (Relay base)
• Nominal input voltage UN: 12 V DC
• Input voltage range in reference to UN: see diagram
• Typical input current at UN: 16 mA
• Typical response time: 5 ms
• Typical release time: 8 ms
• Coil voltage: 12 V DC
• Protective circuit: Damping diode
• Operating voltage display: Yellow LED
• Power dissipation for nominal condition: 0.19 W
• Contact type: 1 PDT
• Type of switch contact: Single contact
• Contact material: AgSnO, hard gold-plated
• Maximum switching voltage (AC): 30 V
• Maximum switching voltage (DC): 36 V
• Minimum switching voltage: 100 mV (at 10 mA)
• Min. switching current: 1 mA
• Maximum inrush current: 50 mA
• Limiting continuous current: 50 mA
• Interrupting rating (ohmic load) max.: 1.2 W (at 24 V DC)
• Switching capacity (DC): 1 A (24 V (DC13))
• Switching capacity (AC): 3 A (230 V (AC 15))
• Contact material (destroyed gold layer): AgSnO
• Maximum switching voltage (destroyed gold layer, AC/DC): 250 V
• Minimum switching voltage (destroyed gold layer): 5 V (at 100 mA)
• Limiting continuous current (destroyed gold layer): 6 A
• Min. switching current (destroyed gold layer): 10 mA (at 12 V)
• Interrupting rating (ohmic load) max. (destroyed gold layer, 24V DC): 140 W
• Interrupting rating (ohmic load) max. (destroyed gold layer, 48V DC): 20 W
• Interrupting rating (ohmic load) max. (destroyed gold layer, 60V DC): 18 W
• Interrupting rating (ohmic load) max. (destroyed gold layer, 110V DC): 23 W
• Interrupting rating (ohmic load) max. (destroyed gold layer, 220V DC): 40 W
• Switching capacity (destroyed gold layer, 24V DC): 2 A
• Switching capacity (destroyed gold layer, 110V DC): 0.2 A
• Switching capacity (destroyed gold layer, 220V DC): 0.1 A
• Switching capacity (destroyed gold layer, 24V AC): 3 A
• Switching capacity (destroyed gold layer, 120V AC): 3 A
• Switching capacity (destroyed gold layer, 230V AC): 3 A
• Test voltage relay winding/relay contact: 4 kVrms(50 Hz, 1 min.)
• Operating mode: 100% operating factor
• Mechanical service life: approx. 2x 10^7 cycles
• Service life, electrical: see diagram
• Mounting position: any
• Assembly instructions: In rows with zero spacing
• Connection name (Input side): Input side
• Connection method (Input side): Push-in connection
• Stripping length (Input side): 8 mm
• Conductor cross section solid (Input side): 0.14 mm² ... 1.5 mm²
• Conductor cross section flexible (Input side): 0.14 mm² ... 1.5 mm²
• Conductor cross section AWG (Input side): 24 ... 16
• Connection name (Output side): Output side
• Connection method (Output side): Push-in connection
• Stripping length (Output side): 8 mm
• Conductor cross section solid (Output side): 0.14 mm² ... 1.5 mm²
• Conductor cross section flexible (Output side): 0.14 mm² ... 1.5 mm²
• Conductor cross section AWG (Output side): 24 ... 16
• Standards/regulations: DIN EN 50178
• Rated insulation voltage: 250 V AC
• Rated surge voltage: 6 kV
• Insulation: safe isolation
• Pollution degree: 2
• Overvoltage category: III
• Flammability rating according to UL 94: V2
• REACh SVHC: Lead 7439-92-1
• China RoHS: Environmentally Friendly Use Period = 50