Phoenix Contact 3212112 Terminal Block with Diode

Phoenix Contact 3212112 Terminal Block with Diode Specifications:

• Packing unit: 1 pc
• Minimum order quantity: 50 pc
• GTIN: 4046356509183
• Weight per Piece (excluding packing): 10.000 g
• Custom tariff number: 85369010
• Country of origin: Poland
• Number of levels: 1
• Number of connections: 2
• Potentials: 1
• Note: Max current determined by diode. Installed: diode 1N 5408, reverse voltage: 1000 V, maximum continuous current: 1.5 A
• Nominal cross section: 4 mm²
• Color: gray
• Insulating material: PA
• Flammability rating according to UL 94: V0
• Rated surge voltage: 8 kV
• Degree of pollution: 3
• Overvoltage category: III
• Insulating material group: I
• Maximum power dissipation for nominal condition: 1.02 W
• Designation: Level 1+2
• Maximum load current: 1.5 A (with 6 mm² conductor cross section, rigid)
• Nominal current IN: 1.5 A
• Nominal voltage UN: 800 V
• Open side panel: Yes
• Relative insulation material temperature index (Elec., UL 746 B): 130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 130 °C
• Static insulating material application in cold: -60 °C
• Behavior in fire for rail vehicles (DIN 5510-2): Test passed
• Flame test method (DIN EN 60695-11-10): V0
• Oxygen index (DIN EN ISO 4589-2): >32 %
• NF F16-101, NF F10-102 Class I: 2
• NF F16-101, NF F10-102 Class F: 2
• Surface flammability NFPA 130 (ASTM E 162): passed
• Specific optical density of smoke NFPA 130 (ASTM E 662): passed
• Smoke gas toxicity NFPA 130 (SMP 800C): passed
• Calorimetric heat release NFPA 130 (ASTM E 1354): 28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
• Width: 6.2 mm
• End cover width: 2.2 mm
• Length: 56 mm
• Height NS 35/7,5: 36.5 mm
• Height NS 35/15: 44 mm
• Stripping length: 10 mm ... 12 mm
• Conductor cross section solid min.: 0.2 mm²
• Conductor cross section solid max.: 6 mm²
• Conductor cross section AWG min.: 24
• Conductor cross section AWG max.: 10
• Conductor cross section flexible min.: 0.2 mm²
• Conductor cross section flexible max.: 6 mm²
• Min. AWG conductor cross section, flexible: 24
• Max. AWG conductor cross section, flexible: 12
• Conductor cross section flexible, with ferrule without plastic sleeve min.: 0.25 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.: 4 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.: 0.25 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.: 4 mm²
• 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve min.: 0.5 mm²
• 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve max.: 1 mm²
• Internal cylindrical gage: A4
• Connection in acc. with standard: CSA
• Standards and Regulations: NF F16-101, NF F10-102, NFPA 130