Phoenix Contact PLCRPT24DC21EX 24V DC Power Relay Module

Phoenix Contact PLCRPT24DC21EX 24V DC Power Relay Module Specifications:

• Packing unit: 1 pc
• Minimum order quantity: 10 pc
• GTIN: 4055626363653
• Weight per Piece (excluding packing): 38.000 g
• Custom tariff number: 85364190
• Country of origin: Germany
• Width: 6.2 mm
• Height: 80 mm
• Depth: 94 mm
• Ambient temperature (operation) UL: -20 °C ... 60 °C
• Ambient temperature (operation) ATEX / IECEx: -40 °C ... 60 °C
• Ambient temperature (storage/transport): -40 °C ... 85 °C
• Degree of protection: IP20 (Relay base)
• Nominal input voltage UN: 24 V DC
• Typical input current at UN: 9 mA
• Typical response time: 5 ms
• Typical release time: 8 ms
• Protective circuit: Reverse polarity protection, Polarity protection diode, Free-wheeling diode, Damping diode
• Operating voltage display: Yellow LED
• Power dissipation for nominal condition: 0.22 W
• Contact type: 1 PDT
• Type of switch contact: Single contact
• Contact material: AgSnO
• Maximum switching voltage: 250 V AC/DC
• Minimum switching voltage: 5 V (at 100 mA)
• Min. switching current: 10 mA (at 12 V)
• Maximum inrush current: 10 A (4 s)
• Limiting continuous current: 6 A
• Interrupting rating (ohmic load) max.: 140 W (at 24 V DC), 20 W (at 48 V DC), 18 W (at 60 V DC), 23 W (at 110 V DC), 40 W (at 220 V DC), 1500 VA (for 250 V AC)
• Switching capacity: 2 A (at 24 V, DC13), 0.2 A (at 110 V, DC13), 0.1 A (at 220 V, DC13), 3 A (at 24 V, AC15), 3 A (at 120 V, AC15), 3 A (at 230 V, AC15)
• Test voltage relay winding/relay contact: 4 kV AC (50 Hz, 1 min.)
• Operating mode: 100% operating factor
• Flammability rating according to UL 94: V0 (Housing)
• Mechanical service life: 2x 10^7 cycles
• Mounting position: any
• Assembly instructions: In rows with zero spacing
• Connection name (Coil side): Coil side
• Connection method (Coil side): Push-in connection
• Stripping length (Coil side): 8 mm
• Conductor cross section solid (Coil side): 0.14 mm² ... 2.5 mm²
• Conductor cross section flexible (Coil side): 0.14 mm² ... 2.5 mm²
• Conductor cross section AWG (Coil side): 26 ... 14
• Connection name (Contact side): Contact side
• Connection method (Contact side): Push-in connection
• Stripping length (Contact side): 8 mm
• Conductor cross section solid (Contact side): 0.14 mm² ... 2.5 mm²
• Conductor cross section flexible (Contact side): 0.14 mm² ... 2.5 mm²
• Standards/regulations: IEC 60664, EN 50178, EN 60079-0, -7, -15
• Pollution degree: 3
• Overvoltage category: III
• Conformance: CE-compliant
• ATEX: II 3G Ex ec nC IIC T4 Gc
• IECEx: Ex ec nC IIC T4 Gc
• UL, USA: Class I, Zone 2, AEx nA nC IIC T6
• UL, USA/Canada: Class I, Div. 2, Groups A, B, C, D
• UL, Canada: Class I, Zone 2, Ex nA nC IIC Gc T6 X
• REACh SVHC: Lead 7439-92-1
• China RoHS: Environmentally Friendly Use Period = 50 years