Phoenix Contact PSRSCP24UCURM5X11X2 Safety Relay Module

Phoenix Contact PSRSCP24UCURM5X11X2 Safety Relay Module Specifications:

• Packing unit: 1 STK
• GTIN: None
• Width: 22.5 mm
• Height: 99 mm
• Depth: 114.5 mm
• Ambient temperature (operation): -20 °C ... 55 °C
• Ambient temperature (storage/transport): -40 °C ... 70 °C
• Max. permissible relative humidity (operation): 75 % (on average, 85% infrequently, non-condensing)
• Max. permissible humidity (storage/transport): 75 % (on average, 85% infrequently, non-condensing)
• Maximum altitude: max. 2000 m (Above sea level)
• Nominal input voltage UN: 24 V AC/DC
• Input voltage range in reference to UN: 0.8 ... 1.1
• Typical input current at UN: 47 mA
• Typical response time: 20 ms
• Typical release time: 20 ms
• Contact type: 5 enabling current paths
• Signaling current path: 1
• Contact material: AgSnO2, + 0.2 µm Au
• Minimum switching voltage: 15 V AC/DC
• Maximum switching voltage: 250 V AC/DC
• Limiting continuous current: 6 A
• Inrush current, minimum: 25 mA
• Maximum inrush current: 6 A
• Sq. Total current: 72 A
• Interrupting rating (ohmic load) max.: 144 W (24 V DC, τ = 0 ms)
• Interrupting rating (ohmic load) max. 2: 288 W (48 V DC, τ = 0 ms)
• Interrupting rating (ohmic load) max. 3: 77 W (110 V DC, τ = 0 ms)
• Interrupting rating (ohmic load) max. 4: 88 W (220 V DC, τ = 0 ms)
• Interrupting rating (ohmic load) max. 5: 1500 VA (250 V AC, τ = 0 ms)
• Maximum interrupting rating (inductive load): 42 W (24 V DC, τ = 40 ms)
• Maximum interrupting rating (inductive load) 2: 40 W (48 V DC, τ = 40 ms)
• Maximum interrupting rating (inductive load) 3: 35 W (110 V DC, τ = 40 ms)
• Maximum interrupting rating (inductive load) 4: 33 W (220 V DC, τ = 40 ms)
• Switching capacity min.: 0.4 W
• Output fuse: 6 A fast blow (N/O contact)
• Output fuse 2: 6 A fast blow (N/C contact)
• Relay type: Electromechanical relay with forcibly guided contacts in accordance with EN 50205
• Mechanical service life: Approx. 10 cycles
• Net weight: 194.1 g
• Mounting type: DIN rail mounting
• Degree of protection: IP54
• Degree of protection 2: IP20
• Min. degree of protection of inst. location: IP54
• Mounting position: any
• Control: single-channel
• Housing material: Polyamide PA non-reinforced
• Connection method: Screw connection
• pluggable: Yes
• Conductor cross section solid min.: 0.2 mm²
• Conductor cross section solid max.: 2.5 mm²
• Conductor cross section flexible min.: 0.2 mm²
• Conductor cross section flexible max.: 2.5 mm²
• Conductor cross section AWG min.: 24
• Conductor cross section AWG max.: 12
• Stripping length: 7 mm
• Screw thread: M3
• Stop category: 0
• Designation: Air clearances and creepage distances between the power circuits
• Standards/regulations: DIN EN 50178
• Rated insulation voltage: 250 V
• Rated surge voltage/insulation: 4 kV / basic isolation
• Degree of pollution: 2
• Overvoltage category: III