The PHOENIX CONTACT RIF-1-RPT-LV-120AC/2X21 relay module provides a compact and efficient solution for industrial automation and control systems. This module combines a relay base, power contact relay, plug-in display/suppressor module, and retaining bracket for a complete and ready-to-use system. It is ideal for applications requiring reliable switching of AC loads and offers a 120V AC input voltage with a wide operating voltage range. The push-in connection simplifies wiring and reduces installation time, while the varistor provides surge protection for enhanced reliability. Its compact design allows for space-saving integration into control panels and machinery.
Utilization restriction: EMC: class A product, see manufacturer's declaration
Note: FBS 2-6... plug-in bridge for input side, FBS-2-8... plug-in bridge for output side
Width: 16 mm
Height: 93 mm
Depth: 75 mm
Ambient temperature (operation): -40 °C ... 50 °C
Ambient temperature (storage/transport): -40 °C ... 85 °C
Degree of protection: IP20 (Relay base), RT III (Relay)
Nominal input voltage UN: 120 V AC
Input voltage range in reference to UN: see diagram
Mains frequency: 50/60 Hz
Typical input current at UN: 8 mA
Typical response time: 3 ms ... 12 ms
Typical release time range: 3 ms ... 20 ms
Coil voltage: 120 V AC
Protective circuit: Varistor
Operating voltage display: Yellow LED
Power dissipation for nominal condition: 0.1 W
Contact type: 2 PDT
Type of switch contact: Single contact
Contact material: AgNi
Maximum switching voltage: 250 V AC/DC
Minimum switching voltage: 5 V (at 10 mA)
Min. switching current: 10 mA (At 5 V)
Maximum inrush current: 12 A (20 ms, N/O contact)
Limiting continuous current: 8 A (see diagram)
Interrupting rating (ohmic load) max.: 192 W (at 24 V DC), 124 W (at 48 V DC), 60 W (at 60 V DC), 44 W (at 110 V DC), 57 W (at 220 V DC), 2000 VA (for 250 V AC)
Switching capacity: 2 A (at 24 V, DC13), 0.2 A (at 250 V, DC13), 3 A (at 24 V, AC15), 3 A (at 120 V, AC15)
Test voltage relay winding/relay contact: 4 kVrms(50 Hz, 1 min.)