SIEMENS ENERGY 3RV10111DA10 Motor Protection Circuit Breaker

SIEMENS ENERGY 3RV10111DA10 Motor Protection Circuit Breaker Specifications:

• Product brand name: SIRIUS
• Product designation: Circuit breaker
• Design of the product: For motor protection
• Product type designation: 3RV1
• Size of the circuit-breaker: S00
• Size of contactor can be combined: S00
• Auxiliary switch: Yes
• Power loss at AC (hot operating state): 7.25 W
• Power loss per pole at AC (hot operating state): 2.4 W
• Insulation voltage: 690 V
• Surge voltage resistance: 6 kV
• Maximum permissible voltage for safe isolation: 400 V
• IP rating (front): IP20
• IP rating (terminal): IP00
• Mechanical service life: 100,000 cycles
• Electrical endurance: 100,000 cycles
• ATEX directive type: Ex II (2) GD
• ATEX certificate: DMT 02 ATEX F 001
• DIN EN 81346-2 reference code: Q
• Maximum installation altitude: 2,000 m
• Operating ambient temperature: -20 ... +60 °C
• Storage ambient temperature: -50 ... +80 °C
• Transport ambient temperature: -50 ... +80 °C
• Temperature compensation: -20 ... +60 °C
• Relative humidity during operation: 10 ... 95 %
• Number of poles for main circuit: 3
• Adjustable pick-up value current: 2.2 ... 3.2 A
• Operating voltage (rated value): 690 V
• Operating voltage (AC-3 rated value max): 690 V
• Operating frequency (rated value): 50 ... 60 Hz
• Operating current (rated value): 3.2 A
• Operating current (at AC-3, 400 V): 3.2 A
• Operating power (at AC-3, 230 V): 550 W
• Operating power (at AC-3, 400 V): 1,100 W
• Operating power (at AC-3, 500 V): 1,500 W
• Operating power (at AC-3, 690 V): 2,200 W
• Maximum operating frequency: 15 1/h
• Number of auxiliary contacts: 0
• Ground fault detection: No
• Phase failure detection: Yes
• Trip class: CLASS 10
• Overload release design: thermal
• Short-circuit current breaking capacity (Ics) at AC (240 V): 100,000 A
• Short-circuit current breaking capacity (Ics) at AC (400 V): 100,000 A
• Short-circuit current breaking capacity (Ics) at AC (500 V): 3,000 A
• Short-circuit current breaking capacity (Ics) at AC (690 V): 2,000 A
• Maximum short-circuit current breaking capacity (Icu) at AC (240 V): 100 kA
• Maximum short-circuit current breaking capacity (Icu) at AC (400 V): 100 kA
• Maximum short-circuit current breaking capacity (Icu) at AC (500 V): 3 kA
• Maximum short-circuit current breaking capacity (Icu) at AC (690 V): 2 kA
• Instantaneous short-circuit trip unit: 42 A
• Full-load current (FLA) at 480 V: 3.2 A
• Full-load current (FLA) at 600 V: 3.2 A
• Mechanical performance (hp) at 110/120 V: 0.1 hp
• Mechanical performance (hp) at 230 V: 0.25 hp
• Mechanical performance (hp) at 200/208 V: 0.5 hp
• Mechanical performance (hp) at 220/230 V: 0.75 hp
• Mechanical performance (hp) at 460/480 V: 1.5 hp
• Mechanical performance (hp) at 575/600 V: 2 hp
• Mounting position: any
• Mounting type: screw and snap-on mounting
• Height: 90 mm
• Width: 45 mm
• Depth: 75 mm
• Removable terminal for auxiliary circuit: No
• Electrical connection (main circuit): screw-type terminals
• Electrical connector arrangement (main circuit): Top and bottom
• Connectable conductor cross-sections (main contacts): 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x (1 ... 4 mm²)
• Connectable conductor cross-sections (auxiliary contacts): 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
• Tightening torque (main contacts): 0.8 ... 1.2 N·m
• Tightening torque (auxiliary contacts): 0.8 ... 1.2 N·m
• Screwdriver tip size: Pozidriv 2
• Connection screw thread: M3
• B10 value (high demand rate): 5,000
• Dangerous failure proportion (low demand rate): 50 %
• Dangerous failure proportion (high demand rate): 50 %
• Failure rate (FIT) (low demand rate): 50 FIT