SIEMENS ENERGY 3SK11111AW20 Safety Relay Enabling Circuit

SIEMENS ENERGY 3SK11111AW20 Safety Relay Enabling Circuit Specifications:

• product brand name: SIRIUS
• product category: Safetyrelays
• product designation: safetyrelays
• design of the product: Relayenablingcircuits
• protection class IP of the enclosure: IP20
• touch protection against electrical shock: finger-safe
• insulation voltage rated value: 300 V
• ambient temperature during storage: -40 ... +80 °C
• ambient temperature during operation: -25 ... +60 °C
• air pressure: 900 ... 1 060 hPa
• relative humidity during operation: 10 ... 95 %
• installation altitude: 2 000 m
• vibration resistance: 5 ... 500 Hz: 0.75 mm
• shock resistance: 10g/ 11 ms
• surge voltage resistance rated value: 4 000 V
• EMC emitted interference: IEC 60947-5-1, Class A
• overvoltage category: 3
• degree of pollution: 3
• reference code: F
• power loss maximum: 2.5 W
• number of sensor inputs: 1
• design of the cascading: none
• type of the safety-related wiring of the inputs: single-channel and two-channel
• product feature cross-circuit-proof: Yes
• SIL acc. to IEC 61508: 3
• PL acc. to EN ISO 13849-1: e
• category acc. to EN ISO 13849-1: 4
• Safe failure fraction: 99 %
• PFHD: 0.0000000015 1/h
• PFDavg: 0.000001
• T1 value: 20 y
• hardware fault tolerance: 1
• safety device type: Type A
• number of outputs as contact-affected switching element NC: 1
• number of outputs as contact-affected switching element NO: 3
• stop category: 0
• design of input feedback: Yes
• design of input start: Yes
• operating frequency maximum: 360 1/h
• switching capacity current DC-13 at 24V: 5 A
• switching capacity current DC-13 at 115V: 0.2 A
• switching capacity current DC-13 at 230V: 0.1 A
• switching capacity current AC-15 at 115V: 5 A
• switching capacity current AC-15 at 230V: 5 A
• switching capacity current DC-13 NC at 24V: 1 A
• switching capacity current DC-13 NC at 115V: 0.2 A
• switching capacity current DC-13 NC at 230V: 0.1 A
• switching capacity current AC-15 NC at 115V: 1.5 A
• switching capacity current AC-15 NC at 230V: 1.5 A
• thermal current of the switching element: 5 A
• operational current at 17V minimum: 5 mA
• total current maximum: 12 A
• mechanical service life: 10 000 000
• fuse link for short-circuit protection NO contacts: gL/gG: 6A or circuit breaker type A: 3A or circuit breaker type B: 2A or circuit breaker type C: 1A
• fuse link for short circuit protection NC contacts: Diazed or Neozed fuses, operating class gL/gG: 6 A or MCB type A: 2 A or MCB type B: 2 A or MCB type C: 1 A
• wire length for total of all sensor circuits: 2 000 m
• make time typical: 110 ms
• make time at DC maximum: 130 ms
• make time at AC maximum: 130 ms
• make time after power failure typical: 110 ms
• make time after power failure maximum: 130 ms
• make time with monitored start maximum: 15 ms
• make time with monitored start typical: 15 ms
• backslide delay time after opening of the safety circuits typical: 10 ms
• backslide delay time in the event of power failure typical: 200 ms
• recovery time after opening of the safety circuits typical: 10 ms
• recovery time after power failure typical: 0.32 s
• pulse duration of the sensor input minimum: 150 ms
• pulse duration of the ON pushbutton input minimum: 0.015 s
• type of voltage of the control supply voltage: AC/DC
• control supply voltage at DC rated value: 110 ... 240 V
• control supply voltage at AC rated value: 110 ... 240 V
• operating range factor control supply voltage: 0.85 ... 1.1