SIEMENS 3RW30271BB14 Soft Starter Motor Control

SIEMENS 3RW30271BB14 Soft Starter Motor Control Specifications:

• Product brand name: SIRIUS
• Product feature: integrated bypass contact system, Thyristors
• Product function: Intrinsic device protection, motor overload protection, Evaluation of thermistor motor protection, External reset, Adjustable current limitation, inside-delta circuit
• Product component: Motor brake output
• Reference identifier acc. to DIN EN 61346-2: Q
• Reference indentifier acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750: G
• Operating current at 40 °C rated value: 32 A
• Operating current at 50 °C rated value: 29 A
• Operating current at 60 °C rated value: 26 A
• Mechanical power output for three-phase motors at 230 V: 7 500 W
• Mechanical power output for three-phase motors at 400 V: 15 000 W
• Yielded mechanical performance hp at 200/208 V: 7.5 hp
• Operating frequency rated value: 50 ... 60 Hz
• Relative negative tolerance of the operating frequency: -10 %
• Relative positive tolerance of the operating frequency: 10 %
• Operating voltage at standard circuit rated value: 200 ... 480 V
• Relative negative tolerance of the operating voltage at standard circuit: -15 %
• Relative positive tolerance of the operating voltage at standard circuit: 10 %
• Minimum load: 10 %
• Continuous operating current [% of Ie] at 40 °C: 115 %
• Power loss at operating current at 40 °C: 13 W
• Type of voltage of the control supply voltage: AC/DC
• Control supply voltage frequency 1 rated value: 50 Hz
• Control supply voltage frequency 2 rated value: 60 Hz
• Control supply voltage 1 at AC at 50 Hz: 110 ... 230 V
• Control supply voltage 1 at AC at 60 Hz: 110 ... 230 V
• Control supply voltage 1 at DC: 110 ... 230 V
• Display version for fault signal: red
• Size of engine control device: S0
• Width: 45 mm
• Height: 125 mm
• Depth: 150 mm
• Mounting type: screw and snap-on mounting
• Mounting position: With vertical mounting surface +/-10° rotatable, with vertical mounting surface +/- 10° tiltable to the front and back
• Required spacing with side-by-side mounting upwards: 60 mm
• Required spacing with side-by-side mounting at the side: 15 mm
• Required spacing with side-by-side mounting downwards: 40 mm
• Wire length maximum: 300 m
• Number of poles for main current circuit: 3
• Type of electrical connection for main current circuit: screw-type terminals
• Type of electrical connection for auxiliary and control current circuit: screw-type terminals
• Number of NC contacts for auxiliary contacts: 0
• Number of NO contacts for auxiliary contacts: 1
• Number of CO contacts for auxiliary contacts: 0
• Type of connectable conductor cross-sections for main contacts: 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²)
• Type of connectable conductor cross-sections at AWG conductors for main contacts: 1x 8, 2x (16 ... 10)
• Type of connectable conductor cross-sections for auxiliary contacts: 2x (0.5 ... 2.5 mm²)
• Type of connectable conductor cross-sections at AWG conductors for auxiliary contacts: 2x (20 ... 14)
• Installation altitude at height above sea level: 5 000 m
• Environmental category: 3K6, 3C3, 3S2, 3M6
• Ambient temperature during operation: -25 ... +60 °C
• Ambient temperature during storage: -40 ... +80 °C
• Derating temperature: 40 °C
• Protection class: IP IP20