SUPERIOR ELECTRIC Datasheet & Stock

The Stabiline DIN1 Plus series Surge Protective Device delivers worry-free performance with an innovative and proven technology design. This models provide surge protection against harmful transient voltage and high-frequency noise that exceed the nominal operating voltage of AC and DC critical dedicated control loads. The DIN1 PLUS series unit is installed/connected in either Series or Parallel with the line and the equipment to be protected. The DIN1 PLUS contains no line/load sensitive components and therefore can be connected in any orientation. The DIN1 PLUS series units respond reliably and repeatedly in less than 1 nanosecond. The fail-safe design incorporates thermal fuse links and TMOVs and dual Component-Level Fusing (CLF) is standard in each unit. All models include an LED to visually indicate that protection is active. Units are self-contained in rugged plastic enclosures and employ twenty millimetre (20mm) MOVs as their key suppression elements.




DIN-rail mounting or wall mount tabs

10 or 20kA Surge amp capacity protection per mode for DC use

20 or 40kA Surge amp capacity protection per mode for AC use

15 and 30A models – Maximum continuous operating current

Ø1, 2-wire plus ground, 24, 48, 120 and 250V models

Ultra compact, fail-safe design

High-frequency noise filtering

Hard-wired via screw terminals

LED visual protection status





Applications


Safety,

Industrial,

Power Management,

Security,

Automation & Process Control,

Metering,

System Monitoring,

Imaging, Video & Vision