Sensata - Cynergy3 DBT71210F-HR Datasheet & Stock

The DBT71210F-HR from Cynergy3 is a high insulation resistance, high voltage reed relay with PCB mount and coil with flying lead HV connection. It has a very high isolation voltage of up to 10KV and it is achieved through the use of this high vacuum reed switch with tungsten contacts. This relay suitable for high reliability applications such as cardiac defibrillators, test equipment and high voltage power supplies. The tungsten contacts can switch higher voltages.




Contact configuration is SPST-NC

Coil voltage is 12VDC

Minimum insulation resistance is 1x10^14ohm

Maximum contact resistance is 250mohm

Switching voltage is 7KVDC/AC peak, switching current is 2A, carry current is 3A

Switching power is 50W

Coil resistance is 240 ohm

Operating temp range from -20°C to +70°C

Isolation between contact/coil is 17KV

Ideal for sensitive test and measurement circuits which require low leakage current losses





Applications


Industrial,

Test & Measurement