TE CONNECTIVITY 1410142-1 Datasheet & Stock

The MULTIGIG RT series tier-2 Connector is the latest product release to meet customer requirements for high-density and high performance two-piece interconnects. In TE and independent lab tests, the MULTIGIG RT tier-2 connector has performed in excess of 6Gbps using standard FR-4 board material and routing techniques and has been demonstrated to 10Gbps. The MULTIGIG RT tier-2 connector system provides the flexibility to configure the daughtercard for differential, single-ended, open pin field or power within a single connector module. All of these options then mate into a common backplane receptacle. The robust connector uses daughtercard plugs with a printed circuit board (PCB) wafer design and backplane receptacles with a completely enclosed dualbeam design. All signal lines use redundant points of contact for high reliability. The MULTIGIG RT tier-2 connector is available for both 20.32 (0.8) and 25.40mm (1 inch) pitch card spacing.




Excellent performance to 6.25+Gbps

High density - 113 Contacts per inch provides 56 contact pairs per inch for differential signalling

Modular options for signal, power, keying and guidance

Optimized footprints

Robust design

Low noise levels

Supports differential pair widths of 6 mils with 9 mil spacing

Single-ended, open pin field and power wafers available





Applications


Communications & Networking