TEKTRONIX P5200A CAL Datasheet & Stock

The P5200A CAL from Tektronix is a high voltage active differential probe with the BNC interface. The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded. This active differential probe converts floating signals to low voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope. It is used in floating measurements, switching power supply design, motor drive design, electronic ballast design, CRT display design, power device evaluation, power converter design and service.




Calibrated high voltage differential probe, overrange indicator

Switchable attenuation of 50X/500X, 50MHz switchable bandwidth

500X: ±1300V and 50X: ±130V differential voltage

±1300V common mode voltage

1000V CAT II maximum input voltage to earth

Differential input impedance of 10Mohm (2pF)

Input impedance between each input and ground is 5Mohm (4pF)

Typical CMRR of DC: > 80dB, 100KHz: > 60dB, 3.2MHz: > 30dB and 50MHz: > 26dB

Cable length of 1.8m





Applications


Test & Measurement






Contents

P5200A probe, AC280-FL set of 1 red and black hook clips, AC283-FL set of 1 red and black pincer clips, AC285-FL set of 1 red and black alligator clips and 196-3523-00 set 1 of red and black extension cables.