TEKTRONIX P5210A CAL D Datasheet & Stock

The P5210A CAL D from Tektronix is a high voltage active differential probe with TekProbe interface. This has a largest differential dynamic range capability allowing users to safely measure up to ±6000V. Probe is supplied with two sizes of hook tips and has an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe. This probe is equipped with the Tektronix TekProbe interface which communicates scale information to the oscilloscope. Direct connections can be made to oscilloscopes configured with the TekProbe interface or to any oscilloscope when used with the 1103 TekProbe power supply. It is used in floating measurements, switching power supply design, motor drive design, electronic ballast design, CRT display design, power device evaluation, power converter design and service.




Calibrated with data high voltage differential probe, overrange indicator

Switchable attenuation of 100X/1000X, 50MHz switchable bandwidth

1000X: ±5600V and 100X: ±560V differential voltage

±5600V common mode voltage

2300V CAT I, 1000V CAT III maximum input voltage to earth

Differential input impedance of 40Mohm(2.5pF)

Input impedance between each input and ground is 20Mohm (5pF)

Typical CMRR of DC: > 80dB, 100KHz: > 60dB, 3.2MHz: > 40dB and 50MHz: > 30dB

Cable length of 1.8m





Applications


Test & Measurement






Contents

P5210A probe, 2 probe tips, 2 large hook clips, 2 small hook clips, 2 probe heads.