TEKTRONIX TCP0020 CAL DU Datasheet & Stock

The TCP0020 CAL DU from Tektronix is a high performance, easy to use calibrated with data uncertainties AC/DC current probe designed for use with a variety of oscilloscopes. It is designed for direct connection to oscilloscopes, powered directly by oscilloscopes with the TekVPI probe interface. This current probe features accurate AC/DC current measurements, DC to > 50MHz bandwidth, core jaw diameter of 5mm (0.2"), accurately measures current levels as low as 10mA per division, split-core construction allows easy circuit connection, low noise and DC drift and high accuracy with typically less than 1% DC gain error which is important for meeting today’s challenging current measurement needs. It is used in semiconductor devices, power supplies, power inverter/converters, electronic ballasts, mobile communications, motor drives and transportation systems.




Maximum current capability of 20Arms, peak pulse current capability of 100A, DC coupling only

Provides automatic units scaling and readout on the oscilloscope display

One-button Degauss and AutoZero control for ease of use, DC accuracy of ±1% typical

Easy access to scope displayed probe menu for probe setup control and operating status information

Remote control capability through TekVPI oscilloscope, rise time of ≤ 7ns, signal delay of 17ns

Max bare-wire voltage of 150V CAT II (300 V CAT II insulated wire)

1000A/µS max amp/second

Operating temperature range from 0°C to +50°C, operating 5% to 95% RH, tested up to +30°C (+86°F)

Regulatory safety CSA1010.1:1997, CSA1010.2.032-96, IEC61010-1:2001, IEC61010-2-032 approval

Probe head dimension of 30.5mm x 15.2mm x 148mm (H x W x L), 2m cable length & 0.227Kg probe weight





Applications


Test & Measurement,

Industrial,

Consumer Electronics






Contents

TCP0020 probe, Instruction manual (English) (071-3002-xx), Probe ground lead - 6inch length (196-3120-xx), Nylon carrying case (016-1952-xx).