Telemecanique Sensors XMLP200PD730 Datasheet & Stock

The XMLP200PD730 from Schneider Electric / Telemecanique is an OsiSense XM pressure transmitter. This pressure transmitter converts the pressure into an electrical signal which is proportional to the applied pressure. Its high precision makes it suitable for all industrial applications requiring pressure/vacuum display, control or regulation. Being very robust, it is equally suitable for applications involving high operating rates. The fluid connection type is 1/4" - 18 NPT (male), pressure setting range is 0 to 200psi, maximum permissible accidental pressure is 600psibar and destruction pressure is 1400psi. The transmitter has electrostatic discharge immunity test conforming to EN/IEC 61000-4-2 - test level 8KV air, 4KV contact. Materials in contact with fluid are stainless steel AISI 316L. It is approved by NSF ANSI 61 EN/IEC 61326-2-3 standards and certified by EAC, RCM, CE and cULus.




Pressure sensor size is 200psi, ambient air temperature for operation is from -30°C to 85°C

0 to 135°C (fresh water), -40 to 135°C (air, gas, hydraulic oil, refrigeration) controlled fluid

1 male connector M12 4 pins electrical connection

Rated supply voltage is 24VDC SELV, voltage limits: 12 to 33V, current consumption is less than 7mA

Analogue output signal, 0 to 10V 3-wire analogue output function

Load short circuit and reverse polarity protection, IP69K conforming to EN/IEC 60529

Rated impulse withstand voltage 0.5KV, response time on output is

Measurement accuracy is ±0.5% of the measuring range, accuracy is 0.1% of the measuring range

Mechanical durability is >= 10000000 cycles

0.088Kg weight, 26mm diameter, 36mm length, IP65/IP67 protection conforming to EN/IEC 60529





Applications


Industrial