WEIDMULLER 0178220000 SAKS 4/35 USA Terminal Block

WEIDMULLER 0178220000 SAKS 4/35 USA Terminal Block Specifications:

• Type: SAKS 4/35 USA
• Order No.: 0178220000
• Version: Screw connection, Fuse cartridge, for screwable cross-connection, One end without connector
• GTIN(EAN): 4008190095987
• Quantity: 20 pc(s).
• Width: 24 mm
• Height: 75 mm
• Depth: 65 mm
• Depth including DIN rail: 66 mm
• Width (inches): 0.945 inch
• Height (inches): 2.953 inch
• Depth (inches): 2.559 inch
• Net weight: 79.4 g
• Storage temperature, max.: 40 °C
• Storage temperature: 10 °C...40 °C
• Continuous operating temp., max.: 130 °C
• Storage temperature, min.: 10 °C
• Continuous operating temp., min.: -60 °C
• Material: KrG
• UL 94 flammability rating: V-0, 5VA
• Colour: medium yellow
• Number of potentials: 1
• Number of clamping points per level: 2
• Levels cross-connected internally: No
• Rail: TS 35
• PE function: No
• End cover plate required: No
• Number of levels: 1
• Number of potentials per tier: 1
• PE connection: No
• N-function: No
• PEN function: No
• Explosion-tested version: No
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Installation advice: Direct mounting
• Open sides: closed
• Certificate No.(CSA): 12400-188
• Current size C(CSA): 30 A
• Voltage size B(CSA): 600 V
• Voltage size D(CSA): 600 V
• Wire cross section min. (CSA): 22 AWG
• Current size B(CSA): 30 A
• Current size D(CSA): 5 A
• Voltage size C(CSA): 600 V
• Wire cross section max.(CSA): 8 AWG
• Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.: 10 mm²
• Clamping range, max.: 16 mm²
• Clamping range, min.: 0.5 mm²
• Clampingscrew: M 4
• Connection cross-section, stranded, min.: 1.5 mm²
• Connection direction: on side
• Gauge to IEC 60947-1: B6
• Strippinglength: 14 mm
• Tighteningtorque, max.: 2.4 Nm
• Tighteningtorque, min.: 1.2 Nm
• Wire connection cross section, max.: 16 mm²
• Wire connection cross-section, stranded, max.: 10 mm²
• Wire connection cross-section, stranded with wire-end ferrules DIN 6228/1, max.: 10 mm²
• Wire connection cross-section, stranded with wire-end ferrules DIN 6228/1, min.: 0.5 mm²
• Wire connection cross-section, solid, max.: 16 mm²
• Wire connection cross-section, solid, min.: 0.5 mm²
• Operating voltage for display, max.: 400 V
• Type of voltage for indicator: AC/DC
• Rated cross-section: 10 mm²
• Rated current: 16 A
• Volume resistance according to IEC 60947-7-x: 0.56 mΩ
• Rated impulse withstand voltage: 6 kV
• Rated voltage: 400 V
• Current at maximum wires: 30 A
• Power loss in accordance with IEC 60947-7-x: 1.82 W
• Pollution severity: 3
• Certificate No.(UR): E60693
• Conductor size Factorywiringmin.(UR): 26 AWG
• Conductor size Field wiringmin.(UR): 22 AWG
• Voltage size C (UR): 600 V
• Conductor size Factorywiringmax.(UR): 8 AWG
• Conductor size Field wiringmax.(UR): 8 AWG
• Current size C(UR): 30 A
• ETIM 6.0: EC000899
• eClass 9.0: 27-14-11-16
• eClass 10.0: 27-14-11-16
• ETIM 7.0: EC000899
• eClass 9.1: 27-14-11-16
• UNSPSC: 30-21-18-11