WEIDMULLER 0211120000 SAKS 3 Z/6.3X26 Terminal Block

WEIDMULLER 0211120000 SAKS 3 Z/6.3X26 Terminal Block Specifications:

• Width: 13 mm
• Height: 54 mm
• Depth: 61 mm
• Net weight: 45.9 g
• Width(inches): 0.512 inch
• Height(inches): 2.126 inch
• Depth(inches): 2.402 inch
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature,min.: 10 °C
• Continuous operating temp., min.: -60 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 130 °C
• REACH SVHC: Lead 7439-92-1
• Material: KrG
• UL 94 flammability rating: V-0, 5VA
• Colour: mediumyellow
• Certificate No.(ATEX): SIRA03ATEX4289U
• Max. voltage(ATEX): 630 V
• Wire cross section max.(ATEX): 10 mm²
• Current(IECEX): 10 A
• Certificate No.(IECEX): IECEXSIR05.0034U
• Current(ATEX): 10 A
• Max. voltage(IECEX): 630 V
• Wire cross section max.(IECEX): 10 mm²
• Marking EN 60079-7: Ex ec II C Gc
• Version: Screw connection, Fuse cartridge, One end without connector
• Number of levels: 1
• Levels cross-connected internally: No
• Rail: TS 32
• End cover plate required: Yes
• Number of clamping points per level: 2
• PE connection: No
• Explosion-tested version: No
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Installation advice: Direct mounting
• Open sides: right
• Certificate No.(CSA): 12400-198
• Voltage size C(CSA): 600 V
• Wire cross section min. (CSA): 22 AWG
• Current size C(CSA): 10 A
• Wire cross section max.(CSA): 10 AWG
• Blade size: 1.0 x 5.5 mm
• Clampingrange,min.: 0.33 mm²
• Connection cross-section, stranded, max.: 10 mm²
• Tighteningtorque,max.: 2.4 Nm
• Torque level with DMS electric screwdriver: 4
• Wire connection cross section AWG, max.: AWG 10
• Wire connection cross-section, finely stranded, max.: 10 mm²
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,min.: 0.5 mm²
• Wire connection cross-section, solid core, max.: 16 mm²
• Clampingrange,max.: 16 mm²
• Clampingscrew: M 4
• Connection cross-section, stranded, min.: 1.5 mm²
• Gauge to IEC 60947-1: B6
• Strippinglength: 12 mm
• Tighteningtorque,min.: 1.2 Nm
• Type of connection: Screw connection
• Wire connection cross section AWG, min.: AWG 22
• Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1,max.: 10 mm²
• Wire connection cross-section, finely stranded, min.: 0.5 mm²
• Wire connection cross-section, solid core, min.: 0.5 mm²
• Type of voltage for indicator: AC/DC
• Cartridge fuse: G-Si. 1 x 1/4
• Fuse holder(cartridge holder): for screw fixing
• Display: Without LED
• Operatingvoltage,max.: 500 V
• Rated cross-section: 10 mm²
• Rated current: 10 A
• Volume resistance according to IEC 60947-7-x: 0.56 mΩ
• Rated impulse withstand voltage: 6 kV
• Rated voltage: 500 V
• Current at maximum wires: 10 A
• Power loss in accordance with IEC 60947-7-x: 1.82 W
• Pollution severity: 3