WEIDMULLER 1028600000 Bolt-type Screw Terminal

WEIDMULLER 1028600000 Bolt-type Screw Terminal Specifications:

• Type: Bolt-type screw terminals
• Order No.: 1028600000
• Version: Bolt-type screw terminals, Feed-through terminal
• Rated cross-section: 185 mm²
• Threaded stud connection: Yes
• GTIN(EAN): 4008190044091
• Quantity: 4 pc(s).
• Width: 55 mm
• Height: 163 mm
• Depth: 77.5 mm
• Depth including DIN rail: 87 mm
• Net weight: 411.205 g
• Width(inches): 2.165 inch
• Height(inches): 6.417 inch
• Depth(inches): 3.051 inch
• Weight: 438.25g
• Operating temperature range: For operating temperature see EC Design Test Certificate / IEC Ex-Certificate of Conformity
• Storage temperature, min.: 10 °C
• Continuous operating temp., min.: -50 °C
• Storage temperature, max.: 40 °C
• Continuous operating temp., max.: 120 °C
• Material: Wemid
• UL 94 flammability rating: V-0
• Colour: dark beige
• Certificate No.(ATEX): KEMA98ATEX1684U
• Max. voltage(ATEX): 1100 V
• Wire cross section max.(ATEX): 185 mm²
• Current(IECEX): 307 A
• Ex 2014/34/EU label: II 2 G D
• Certificate No.(IECEX): IECEXKEM07.0053U
• Current(ATEX): 307 A
• Max. voltage(IECEX): 1100 V
• Wire cross section max.(IECEX): 185 mm²
• Marking EN 60079-7: Ex eb II C Gb
• End coverplate required: Yes
• Number of clamping points per level: 2
• PE connection: No
• Number of levels: 1
• Levels cross-connected internally: No
• Rail: TS 35
• Explosion-tested version: Yes
• Open sides: closed
• Number of similar terminals: 1
• Type of mounting: Snap-on
• Certificate No.(CSA): 200039-1244019
• Current size D(CSA): 5 A
• Voltage size D(CSA): 600 V
• Wire cross section min. (CSA): 8 AWG
• Current size C(CSA): 360 A
• Voltage size C(CSA): 600 V
• Wire cross section max.(CSA): 500 kcmil
• Rated cross-section (IECEX/ATEX): 185 mm²
• Rated current: 353 A
• Standards: IEC 60947-7-1
• Power loss in accordance with IEC 60947-7-x: 11.3 W
• Pollution severity: 3
• Rated voltage: 1,000 V
• Current at maximum wires: 415 A
• Volume resistance according to IEC 60947-7-x: 0.09 mΩ
• Rated impulse withstand voltage: 8 kV
• 2 x cable lugs DIN 46 234: 10...185 mm²
• Cable lugto DIN 46234: 10...240 mm²
• Clampingrange,max.: 240 mm²
• Number of connections: 2
• Tighteningtorque,max.: 31 Nm
• Type of connection: Threaded stud connection
• 2 x cable lugs DIN 46 235: 25...185 mm²
• Cable lugto DIN 46235: 25...240 mm²
• Clampingrange,min.: 10 mm²
• Stud size for spade connection: M 12
• Tighteningtorque,min.: 14 Nm
• TS 15 offset: 13.5 mm
• ETIM 6.0: EC000897
• eClass 9.0: 27-14-11-20
• eClass 10.0: 27-14-11-20
• ETIM 7.0: EC000897
• eClass 9.1: 27-14-11-20
• UNSPSC: 30-21-18-01